Part number | 853K04A55 | |
---|
EAN | 8026834397958 | |
---|
Unit | Each | |
---|
Properties | - Ball positioning seats made from Teflon
- Internal O-rings made from viton
- Clamping devices for flange mounting made from stainless steel, protected by the valve housing
| |
---|
Technical info | - The abbreviation "A" in the item number means: female thread on both sides; "E" means male thread on both sides
- NO: normally open
- The valves are designed for the 3-wire function (++-), a supply with 12Vdc:
- As long as the controller is fed, the valve rotates and moves into position, in which it interrupts the power consumption independently.
- If the power supply is interrupted, the gear motor brings the ball back to its original position
- The valves are also compatible with the 2-wire controllers:
- where the opening/closing movement by reversing the supply polarity is achieved with a double diverter
| |
---|
Ball material | Stainless steel 316 | |
---|
Voltage | 12 V | |
---|
Response time | 1.4 s | |
---|
CHeight from top to center | 171 mm | |
---|
FThread | 1 1/4 F Inch | |
---|
BHeight from bottom to center | 42 mm | |
---|
XLength between fixing holes | 33 mm | |
---|
LLength nipple | 25 mm | |
---|
ALength pass through | 105 mm | |
---|
Max. working pressure | 12 BAR | |
---|
DNNominal diameter | 32 mm | |
---|
YWidth between fixing holes | 38 mm | |
---|
EWidth pass through | 75 mm | |
---|