Part number | 853K06E77 | |
---|
EAN | 8026834395961 | |
---|
Unit | Each | |
---|
Properties | - Ball positioning seats made from Teflon
- Internal O-rings made from viton
- Clamping devices for flange mounting made from stainless steel, protected by the valve housing
| |
---|
Technical info | - The abbreviation "A" in the item number means: female thread on both sides; "E" means male thread on both sides
- NO: normally open
- The valves are designed for the 3-wire function (++-), a supply with 12Vdc:
- As long as the controller is fed, the valve rotates and moves into position, in which it interrupts the power consumption independently.
- If the power supply is interrupted, the gear motor brings the ball back to its original position
- The valves are also compatible with the 2-wire controllers:
- where the opening/closing movement by reversing the supply polarity is achieved with a double diverter
| |
---|
Ball material | Stainless steel 316 | |
---|
Voltage | 12V/ 3 A V | |
---|
Response time | 2.3 s | |
---|
CHeight from top to center | 187 mm | |
---|
FThread | 2" M Inch | |
---|
BHeight from bottom to center | 61 mm | |
---|
XLength between fixing holes | 57 mm | |
---|
LLength nipple | 27 mm | |
---|
ALength pass through | 174 mm | |
---|
Max. working pressure | 8 BAR | |
---|
DNNominal diameter | 50 mm | |
---|
YWidth between fixing holes | 60 mm | |
---|