Part number | SI4000 | |
---|---|---|
EAN | ||
Unit | Each | |
Long description | A bellow accumulator is an accumulator that uses a rubber bellow as a partition between the gas and liquid. This accumulator comes pre-charged. Kramp is able to supply the accumulator at your desired pre-charge. The following pre-charges can be used as a guideline: preventing chattering pipes with a pre-charge of 95% of the operating pressure and, as an energy reservoir, a pre-charge of 90% of the operating pressure should be maintained. Show more | |
Pros |
| |
Product details |
| |
Volume | 4000 cm³ | |
Pre-charge default pressure | 30 BAR | |
Max. working pressure | 360 BAR | |
Inside thread diameter | 1-1/4 Inch | |
Gas valve thread diamter | 5/8 Inch | |
Gas valve thread type | UNF | |
Total length | 402,7 mm | |
Outside width/diameter | 168 mm | |
Connection type | Thread | |
Connection type - male/female | Female | |
Material | Steel | |
Membrane material | Nitrile rubber [NBR] | |
Admissible pressure ratio | 6:1 | |
Min. working temperature | -15 °C | |
Max. working temperature | 80 °C | |
Type | Bladder | |
Weight | 14 kg |
Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!