Part number | L3353 | |
---|---|---|
EAN | ||
Unit | Each | |
Long description | Pump carriers are required to couple pumps to standard IEC electric motors. Alignment issues are thus avoided. | |
Pros | No alignment of pump and motor required | |
Product details |
| |
Extra info | Type 4E is equipped with a centring washer. The pump and motor combination is often mounted to the tank or machine horizontally for better and convenient maintenance. Disassembling the pump is generally possible without removing the motor, the coupling half that is mounted on the pump goes through the hole of the bell housing. Show more | |
Master model code | LMG351MFS3004E | |
Designed for | The standard lantern rings are made of die-cast aluminium. The lantern rings are applicable for the pumps of the SATURN range and are suitable for powers between 0.25 and 22 kW. For motors with a B5 flange. | |
BDiameter bolt circle | 300 mm | |
Diameter of mounting hole | 257 mm | |
IDistance mounting holes center to center short side | 98.50 mm | |
HDistance mounting holes center to center long side | 128.00 mm | |
Engine power |
| |
Flange | B5 | |
Flange width | 32 mm | |
DInside diameter | 250 mm | |
Lock diameter | 50.8 mm | |
Material | Die-cast aluminium | |
Power max. | 22 kW | |
Motor size | IEC160, IEC180 | |
AOutside diameter | 350 mm | |
Pump group | Gr 3; E (98 x 128); 50.8 | |
Pump group | Gr 3; E (98 x 128) | |
Type | 4E | |
Total width | 179 mm |
Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!