Support
Log in
Print

853K17A88

Part number
853K17A88
EAN8026834397811
Unit
Each
Properties
  • Ball positioning seats made from Teflon
  • Internal O-rings made from viton
  • Clamping devices for flange mounting made from stainless steel, protected by the valve housing
Technical info
  • The abbreviation "A" in the item number means: female thread on both sides; "E" means male thread on both sides
  • NO: normally open
  • The valves are designed for the 3-wire function (++-), a supply with 12Vdc:
  • As long as the controller is fed, the valve rotates and moves into position, in which it interrupts the power consumption independently.
  • If the power supply is interrupted, the gear motor brings the ball back to its original position
  • The valves are also compatible with the 2-wire controllers:
  • where the opening/closing movement by reversing the supply polarity is achieved with a double diverter
Ball material
Stainless steel 316
Voltage
12V/ 3 A V
Response time
2,3 s
CHeight from top to center
200 mm
FThread
2 1/2 F Inch
BHeight from bottom to center
71 mm
DLength fitting to centre line
88 mm
LLength nipple
33 mm
ALength pass through
168 mm
Max. working pressure
6 BAR
DNNominal diameter
65 mm
XWidth pass through
72 mm
YWidth suction fitting
80 mm