Part number | MP9E6 | |
---|---|---|
EAN | ||
Unit | Each | |
Long description | Differential pressure indicators are used on the pressure line to check the efficiency of the filter element. They measure the pressure across the filter element, indicating when the filter element needs replacement. These are available in visual and electric versions. Show more | |
Max. pressure | 420 BAR | |
Protection class IP | 65 | |
Relative accuracy of measurement | 10 % | |
Connection thread diameter | 1/2 Inch | |
Operation temperature | -35 - +110 °C | |
Designed for | MSH - MPS retour zonder bypass - FRI - LMP - MPD | |
Current max. | 5 A | |
Voltage max. | 250 V | |
Pressure setting | 2 BAR | |
Suitable for original number | DLE20HA50P01 | |
Seal | Indicators Viton; Plug T2H HNBR | |
Setting range | 2 +/- 10% BAR | |
Temperature range | -35 ~ +110 °C | |
Tightening torque | 60 N·m | |
Type | Electric - Visual |
Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!