Part number | CP7011B0A | |
---|---|---|
EAN | ||
Unit | Each | |
Technical info | Pressure compensators are used in combination with other valves for pressure and flow control. The valve is normally closed by spring pressure, through flow from 1 to 2 is possible only when the control pressure at 1 is higher than the spring loading and the pilot pressure at 3. When the pressure at pilot 3 is removed, a flow from 1 to 2 is achieved provided the pressure at 1 is sufficiently high to overcome the spring force. Show more | |
Extra info | Always in combination with other valves for pressure and flow control at high volume flow and medium pressure | |
Designed for | Always in combination with other valves for pressure and flow control at high volume flow and medium pressure. | |
Flow rate | 150 l/min | |
Pressure max. | 210 BAR | |
Torque Nm | 68 - 75 N·m | |
Note | Intermittent switch duration, fast reaction, good flow and pressure characteristics. | |
BScrew length | 55,9 mm | |
Seal | Order no.: with code CP 9-4.12.006 | |
Size | CP12-3S Inch | |
Total length | 81.3 mm | |
SW2Wrench size other end | 38.1 mm |
Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!