Part number | U4250 | |
---|
EAN | 8719774237315 | |
---|
Unit | Each | |
---|
Long description | The cuffs made of polyurethane have a symmetrical profile, i.e. the sealing lips are the same length. This design allows these cuffs to be used for both rod and single-acting piston seals. | |
---|
Pros | - Highly flexible and easy assembly in closed room
- Very good oil resistance
- High tensile strength
- High wear resistance
- Suitable for both rod sealing and piston sealing
| |
---|
Product details | - Seal for double-acting and single-acting cylinders
- Temperature range: -30°C to 100°C
- Material : polyurethane
- Symmetrical profile
- Max. 400 bar
- Series U type PU seals are replaced by Series SA-UN seals
- Types 605 and 663 have an asymmetrical profile* and are therefore only suitable for sealing piston rods. So never mount on a piston!
- Type 601 has a symmetrical profile* and is therefore suitable for both piston rod sealing and piston sealing.
- *Asymmetrical profile: the inner lip is shorter than the outer.
- *Symmetrical profile: both the inner and outer sealing lips are the same height.
- For an application specifically as a piston seal, please refer to type ZA-UN under piston seals.
| |
---|
Properties | - Highly flexible and therefore easy to install in enclosed chambers
- Highly oil-resistant
- High tensile strength
- High level of wear-resistance
- Suitable for use as a piston rod seal or piston gasket seal
| |
---|
dInside diameter | 42 mm | |
---|
DOutside diameter | 50 mm | |
---|
HWidth | 8 mm | |
---|