Part number | KT1013 | |
---|
EAN | 5700036774375 | |
---|
Unit | Each | |
---|
Details | - Wear resistant
- Full welding on front, "chain welding" on reverse
| |
---|
Application range | Grip, excavator and crane shovels | |
---|
Technical info | - 500 HB steel can be welded either electrically or using the MIG/MAG process. It is extremely important that the material to be welded is pre-heated to between 50 and 75°C and that the welded material is cooled in a controlled manner
- For electric welding: an alkaline welding rod is recommended, but a standard welding rod can also be used
- MIG/MAG: SG3 wire is recommended, but a standard SG2 wire can also be used
| |
---|
Benefits | - Long service life
- Easy to replace
| |
---|
Long description | - Application:
- Grip, excavator and crane shovels
-
- Benefits:
- Long service life
- Easy to replace
-
- Details:
- Wear resistant
- Full welding on front, "chain welding" on reverse
-
- Technical information:
- 500 HB steel can be welded either electrically or using the MIG/MAG process. It is extremely important that the material to be welded is pre-heated to between 50 and 75°C and that the welded material is cooled in a controlled manner
- For electric welding: an alkaline welding rod is recommended, but a standard welding rod can also be used
- MIG/MAG: SG3 wire is recommended, but a standard SG2 wire can also be used
| |
---|
BEdge strip total width | 100 mm | |
---|
CMounting height | 13 mm | |
---|
B1Welded part width | 46 mm | |
---|
C1Thickness | 21 mm | |
---|
C2Min. working thickness | 3,5 mm | |
---|
Edge strip total length | 3000 mm | |
---|
Hardness HB | 500 | |
---|
Weight | 30 kg | |
---|
Additional info | *Please note that this item is either a dangerous good or a non-standard delivery size. This means a specialist carrier will be used and this item will take upto 48 hours to deliver. | |
---|