Part number | KT250303HX | |
---|
EAN | 5700036774665 | |
---|
Unit | Each | |
---|
Details | Highly wear-resistant Hardox® material cut from the plate | |
---|
Application range | Backhoe digger shovels, crane shovels, front loader shovels | |
---|
Technical info | - Hardox® can be welded either electrically or using the MIG/MAG process. It is important that the material to be welded is pre-heated to between 50 and 75°C and that the welded material is cooled in a controlled manner
- Electrical: a basic welding rod is recommended, but a standard welding rod can also be used
- MIG-MAG: SG3 wire is recommended, but standard SG2 wire can also be used
| |
---|
Benefits | Long service life | |
---|
Long description | - Application:
- Backhoe digger shovels, crane shovels, front loader shovels
-
- Benefits:
- Long service life
-
- Details:
- Highly wear-resistant hardox material cut from the plate
-
- Technical information:
- Hardox can be welded either electrically or using the MIG/MAG process. It is important that the material to be welded is pre-heated to between 50 and 75°C and that the welded material is cooled in a controlled manner
- Electrical: a basic welding rod is recommended, but a standard welding rod can also be used
- MIG-MAG: SG3 wire is recommended, but standard SG2 wire can also be used
| |
---|
BEdge strip total width | 250 mm | |
---|
B1Sloping horizontal width | 44 mm | |
---|
CThickness | 30 mm | |
---|
C1Min. working thickness | 10 mm | |
---|
Edge strip total length | 3000 mm | |
---|
Hardness HB | 400 | |
---|
Weight | 172,5 kg | |
---|