Part number | CB10HVM03013 | |
---|
EAN | | |
---|
Unit | Each | |
---|
Details | - Allows smooth, controlled movement
- Enables accurate positioning of pulling and pushing loads
| |
---|
Application range | - Movement control
- Load holding
- Intermediate plate valve for NG6 valve blocks
| |
---|
Properties | - Adjustable load-holding and counterbalance functions in A and B lines
- Modular construction, hex adjustment
- Suitable for: high pressure and medium volume flow
- Free flow from P to A/B
- Release of A or B to P (T) by means of control pressure from the opposite line
| |
---|
Technical info | - Opening pressure depends on pressure setting, load pressure and control pressure ratio
- Double-acting
- Cartridge construction
- Control valve should have ABT connection in neutral position
- Pressure setting 30% higher than the maximum load pressure
| |
---|
Benefits | - Protects consumer against cavitation
- Protects against pressure peaks caused by external forces
| |
---|
Size code | Cetop 03 | |
---|
Max. flow rate | 35 l/min | |
---|
Consists of | - 2 cartridges
- Housing
- Seal carrier
| |
---|
Pressure range | 35-110 BAR | |
---|
Max working pressure | 210 BAR | |
---|
Pilot ratio | 3:1.0 | |
---|
Adjustment type | External | |
---|
Housing material | Aluminium | |
---|
Sealing material | - Nitrile rubber [NBR]
- Viton
| |
---|
Cavity | MFNG-06-009 | |
---|
Total length | 120 mm | |
---|
Total width | 48,5 mm | |
---|
Total height | 45 mm | |
---|
Thickness | 1,5 mm | |
---|