Support
Log in
Print

STAR84MA

Part number
STAR84MA
EAN
Unit
Each
Application range
These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks
Properties
These pumps can generate both positive pressure and vacuum
Technical info
  • Composition of the item numbers: STAR = series, 72 = type, M = indirect drive 540 rpm, A = automatic lubrication
  • On pumps without automatic lubrication (no "A" in the item number), the pump is equipped with a forced lubrication system that is adjusted using dripper nozzles
  • On pumps without automatic lubrication, the quantity of lubrication oil is set in the factory and cannot be changed without a tool
  • In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation
  • Pumps with indirect drive (M) must be driven anti-clockwise
  • The direction of rotation is determined when the axle to be driven is aligned with the observer
  • If the pump has a direct drive (for example, by a tractor unit) it must be driven anti-clockwise
  • Oil to be used for lubricating the vanes: genuine oil from B. P. (item number BP5070)
  • STAR replaces the Agri- and Euro series
Nominal volume flow rate
14800 l/min
Drive type
PTO 540 rpm
Direction of rotation
Counter-clockwise (CCW)
Ballast air injection system
No
Consists of
  • Including PTO shaft cover
  • Including vacuum valve
  • Without pressure relief valve (item 0200013)
  • These pumps are supplied with standard vanes Long-life vanes available on request
  • Including swivelling connection pipes
  • The pumps are delivered without lubrication oil (item BP5070)
Lubrication system type
Automatic
Vane type
Standard
Crash protection system
No
Max vacuum
0.9 BAR
Max. relative pressure
1.5 BAR
Power requirement for max. pressure
37 kW
Power requirement for max. vacuum
31 kW
Safety valve connection diameter
2 Inch
Depression valve connection diameter
1-1/2 Inch
ATotal length
894 mm
BTotal width
490 mm
CHeight
540 mm
PRotor housing height
326 mm
OUpper housing height
214 mm
LMounting holes diameter
18 mm
IMounting holes distance
  • 247 mm
  • 245 mm
NMounting holes to shaft end distance
351 mm
MMounting holes to end distance
269 mm
KShaft centre to left side end distance
220 mm
XShaft centre to right side end distance
220 mm
Shaft diameter
1-3/8 Inch
Max. shaft rotation
600 r/min
Weight
263 kg

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!

Request account
Find a Kramp dealer
  • Tailored advice from our specialists
  • More than 500.000 products
  • Next-day delivery*