Support
Log in
Print

853K05A66

Part number
853K05A66
EAN8026834395329
Unit
Each
Properties
  • Ball positioning seats made from Teflon
  • Internal O-rings made from viton
  • Clamping devices for flange mounting made from stainless steel, protected by the valve housing
Technical info
  • The abbreviation "A" in the item number means: female thread on both sides; "E" means male thread on both sides
  • NO: normally open
  • The valves are designed for the 3-wire function (++-), a supply with 12Vdc:
  • As long as the controller is fed, the valve rotates and moves into position, in which it interrupts the power consumption independently.
  • If the power supply is interrupted, the gear motor brings the ball back to its original position
  • The valves are also compatible with the 2-wire controllers:
  • where the opening/closing movement by reversing the supply polarity is achieved with a double diverter
Ball material
Stainless steel 316
Voltage
12 V
Response time
2.3 s
CHeight from top to center
178 mm
FThread
1 1/2 F Inch
BHeight from bottom to center
52 mm
XLength between fixing holes
40 mm
LLength nipple
25 mm
ALength pass through
128 mm
Max. working pressure
10 BAR
DNNominal diameter
40 mm
YWidth between fixing holes
49 mm
EWidth pass through
91 mm

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area.

Find a Kramp dealer
  • Tailored advice from our specialists
  • More than 500.000 products