Support
Log in
Print

MEC6500MSC Mobile Vacuum pump std B.P.

Part number
MEC6500MSC
EAN
Unit
Each
Details
  • A maintenance hatch can be used to determine the wear condition of the vanes, indicating when the vanes need to be replaced
  • Each pump is subjected to a final check in the factory, in which the vacuum, compression and lubrication are tested, among other factors
  • A test report relating to the serial number is drawn up for each pump
Application range
The MEC S.C. version has been specially developed as a compressor to completely empty hose reels
Properties
These pumps can generate both positive pressure and vacuum
Technical info
  • Composition of the item numbers: MEC = series, 6500 = type, M = indirect drive 540 rpm, SC = reel compressor
  • Reel compressors are equipped with a forced lubrication system that is set using dripper nozzles
  • The lubrication system must be checked at all times to ensure proper function
  • Pumps with indirect drive (M) must be driven anti-clockwise
  • The direction of rotation is determined when the axle to be driven is aligned with the observer
  • If the pump has a direct drive (for example, by a tractor unit) it must be driven anti-clockwise
Benefits
As pumps from B.P. are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed
Nominal volume flow rate
7000 l/min
Drive type
PTO 540 rpm
Direction of rotation
Counter-clockwise (CCW)
Ballast air injection system
No
Consists of
  • These pumps are supplied with standard vanes ("Long-life" vanes available on request)
  • Without pressure relief valve (0250013) and vacuum valve (0155513)
  • The pumps are delivered without lubrication oil (BP5070)
  • Including PTO shaft cover
Lubrication system type
Forced
Vane type
Standard
Crash protection system
No
Max vacuum
0.94 BAR
Max. relative pressure
4 BAR
Power requirement for max. pressure
24 kW
Power requirement for max. vacuum
12.5 kW
Diameter of hose connection
2-1/2 Inch
Safety valve connection diameter
1-1/2 Inch
Depression valve connection diameter
1-1/2 Inch
Total length
693 mm
Total width
410 mm
Height
450 mm
Mounting holes diameter
15 mm
Mounting holes distance
  • 227 mm
  • 252 mm
Mounting holes to shaft end distance
285 mm
Mounting holes to end distance
156 mm
Shaft centre to left side end distance
195 mm
Shaft centre to right side end distance
215 mm
Shaft centre to bottom distance
95 mm
Shaft diameter
1-3/8 Inch
Max. shaft rotation
600 r/min

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area.

Find a Kramp dealer
  • Tailored advice from our specialists
  • More than 500.000 products