Support
Log in
Print

MEC2000DL

Part number
MEC2000DL
EAN
Unit
Each
Details
  • Each pump is subjected to a final check in the factory, in which the vacuum, compression and lubrication are tested, among other factors
  • A test report relating to the serial number is drawn up for each pump
Application range
These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks
Properties
These pumps can generate both positive pressure and vacuum
Technical info
  • Composition of the item numbers: MEC = series, 8000 = type, D = direct drive 1000 rpm, L = anti-clockwise rotation, A = automatic lubrication
  • On pumps without automatic lubrication (no "A" in the item number), the pump is equipped with a forced lubrication system that is adjusted using dripper nozzles
  • On pumps without automatic lubrication, the quantity of lubrication oil is set in the factory and cannot be changed without a tool
  • In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation
  • Directly driven pumps (DL) must be driven anti-clockwise. Clockwise rotation available on request
  • The direction of rotation is determined when the axle to be driven is aligned with the observer
  • If the pump has a direct drive (for example, by a tractor unit) it must be driven anti-clockwise
  • Oil to be used for lubricating the vanes: genuine oil from B. P. (item number BP5070)
Benefits
As B.P. pumps are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed
Nominal volume flow rate
2750 l/min
Drive type
PTO 1000 rpm without gearbox
Direction of rotation
Counter-clockwise (CCW)
Ballast air injection system
No
Consists of
  • These pumps are supplied with standard vanes. Long-life vanes available on request
  • Without pressure relief valve and vacuum valve
  • The pumps are delivered without lubrication oil (item BP5070)
  • Including PTO shaft cover
Lubrication system type
Forced
Vane type
Standard
Crash protection system
No
Max vacuum
0.9 BAR
Max. relative pressure
1.5 BAR
Power requirement for max. vacuum
4.9 kW
DDiameter of hose connection
45 mm
Safety valve connection diameter
1-1/4 Inch
ATotal length
413 mm
BTotal width
342 mm
CHeight
479 mm
HMounting holes diameter
15 mm
IMounting holes distance
  • 227 mm
  • 172 mm
EMounting holes to shaft end distance
165 mm
GMounting holes to end distance
76 mm
KShaft centre to left side end distance
164 mm
XShaft centre to right side end distance
178 mm
LShaft centre to bottom distance
142 mm
Shaft diameter
1-3/8 Inch
Max. shaft rotation
1400 r/min
Weight
66 kg

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area.

Find a Kramp dealer
  • Tailored advice from our specialists
  • More than 500.000 products