Support
Log in
Print

MEC8000M

Part number
MEC8000M
EAN
Unit
Each
Details
  • Each pump is subjected to a final check in the factory, in which the vacuum, compression and lubrication are tested, among other factors
  • A test report relating to the serial number is drawn up for each pump
Application range
These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks
Properties
  • These pumps can generate both positive pressure and vacuum
  • Oil to be used for lubricating the vanes: genuine oil from B. P. Item number: BP5070
Technical info
  • Composition of the item numbers: MEC = series, 8000 = type, M = indirect drive 540 rpm, A = automatic lubrication
  • On pumps without automatic lubrication (no "A" in the item number), the pump is equipped with a forced lubrication system that is adjusted using dripper nozzles
  • On pumps without automatic lubrication, the quantity of lubrication oil is set in the factory and cannot be changed without a tool
  • In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation
  • Pumps with indirect drive (M) must be driven anti-clockwise
  • The direction of rotation is determined when the axle to be driven is aligned with the observer
  • If the pump has a direct drive (for example, by a tractor unit) it must be driven anti-clockwise
Benefits
As B.P. pumps are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed
Nominal volume flow rate
8100 l/min
Drive type
PTO 540 rpm
Direction of rotation
Counter-clockwise (CCW)
Ballast air injection system
No
Consists of
  • These pumps are supplied with standard vanes ("Long-life" vanes available on request)
  • Without pressure relief valve and vacuum valve
  • The pumps are delivered without lubrication oil (BP5070)
  • Including PTO shaft cover
Lubrication system type
Forced
Vane type
Standard
Crash protection system
No
Max vacuum
0.9 BAR
Max. relative pressure
1.5 BAR
Power requirement for max. pressure
27 kW
Power requirement for max. vacuum
16 kW
Diameter of hose connection
80 mm
Safety valve connection diameter
1-1/2 Inch
ETotal length
773 mm
OTotal width
410 mm
HHeight
637 mm
FMounting holes diameter
15 mm
Mounting holes distance
  • 252 mm
  • 227 mm
AMounting holes to shaft end distance
316 mm
GMounting holes to end distance
170 mm
Shaft centre to left side end distance
195 mm
Shaft centre to right side end distance
215 mm
Shaft diameter
1-3/8 Inch
Max. shaft rotation
600 r/min
Weight
162 kg
Additional info
*Please note that this item is either a dangerous good or a non-standard delivery size. This means a specialist carrier will be used and this item will take upto 48 hours to deliver.

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area.

Find a Kramp dealer
  • Tailored advice from our specialists
  • More than 500.000 products