Support
Log in
Print

L052005

Part number
L052005
EAN
Unit
Each
Long description
Pump carriers are required to couple pumps to standard IEC electric motors. Alignment issues are thus avoided.
Pros
No alignment of pump and motor required
Product details
  • Standard pump holders for gear pumps group 1,2,3, type L
  • For gear pumps with rectangular flange and tapered shaft (European standard)
  • Assortment : 0.22 to 22kW
  • Cast aluminium
  • Type 4E (see Master model Code) is equipped with centering ring. The pump and motor combination is often mounted horizontally on top of the tank for convenient maintenance. Disassembling the pump is generally possible without removing the motor, the coupling half that is mounted on the pump fits through the hole of the bell housing.
  • type 4S (see Master model Code) is equipped without a centering ring. The pump and motor combination is often mounted to the tank vertically, meaning that the pump is immersed in the reservoir
  • In combination with elastic couplings type GE
  • Temperature range : -30 °C to +80 °C
Extra info
The 4S type is designed without centre washer. The pump and motor combination is often mounted to the tank vertically, meaning that the pump is immersed in the reservoir.
Master model code
LMG200MFS05M4S
Designed for
The standard lantern rings are made of die-cast aluminium. The lantern rings are applicable for the pumps of the SATURN range and are suitable for powers between 0.25 and 22 kW. For motors with a B5 flange.
BDiameter bolt circle
165 mm
Diameter of mounting hole
137 mm
HDistance mounting holes center to center long side
66.00 mm
Flange
B5
Flange width
18 mm
DInside diameter
130 mm
Material
Die-cast aluminium
Power max.
0.75 kW
AOutside diameter
200 mm
Pump group
Gr 0.5
Type
4S
Total width
87 mm