Support
Log in
Print

L11051B14

Part number
L11051B14
EAN
Unit
Each
Long description
Pump carriers are required to couple pumps to standard IEC electric motors. Alignment issues are thus avoided.
Pros
No alignment of pump and motor required
Product details
  • Standard pump holders for gear pumps group 1,2,3, type L
  • For gear pumps with rectangular flange and tapered shaft (European standard)
  • Assortment : 0.22 to 22kW
  • Cast aluminium
  • Type 4E (see Master model Code) is equipped with centering ring. The pump and motor combination is often mounted horizontally on top of the tank for convenient maintenance. Disassembling the pump is generally possible without removing the motor, the coupling half that is mounted on the pump fits through the hole of the bell housing.
  • type 4S (see Master model Code) is equipped without a centering ring. The pump and motor combination is often mounted to the tank vertically, meaning that the pump is immersed in the reservoir
  • In combination with elastic couplings type GE
  • Temperature range : -30 °C to +80 °C
Extra info
Type 4E is equipped with a centring washer. The pump and motor combination is often mounted to the tank or machine horizontally for better and convenient maintenance. Disassembling the pump is generally possible without removing the motor, the coupling half that is mounted on the pump goes through the hole of the bell housing.
Show more
Master model code
LMG105MFS1004E
Designed for
The standard lantern rings are made of die-cast aluminium. The lantern rings are applicable for the pumps of the SATURN range and are suitable for powers between 0.25 and 22 kW. For motors with a B5 flange.
BDiameter bolt circle
85 mm
Diameter of mounting hole
64 mm
IDistance mounting holes center to center short side
52.00 mm
HDistance mounting holes center to center long side
72.00 mm
Flange
B14
Flange width
8 mm
DInside diameter
70 mm
Lock diameter
25.4 mm
Material
Die-cast aluminium
AOutside diameter
105 mm
Pump group
Gr 1; E (52 x 72)
Type
4E
Total width
67 mm