| Part number | KT250253HX | |
|---|
| EAN | 5700036774603 | |
|---|
| Unit | Each | |
|---|
| Details | Highly wear-resistant Hardox® material cut from the plate | |
|---|
| Application range | Backhoe digger shovels, crane shovels, front loader shovels | |
|---|
| Technical info | - Hardox® can be welded either electrically or using the MIG/MAG process. It is important that the material to be welded is pre-heated to between 50 and 75°C and that the welded material is cooled in a controlled manner
- Electrical: a basic welding rod is recommended, but a standard welding rod can also be used
- MIG-MAG: SG3 wire is recommended, but standard SG2 wire can also be used
| |
|---|
| Benefits | Long service life | |
|---|
| Long description | - Application:
- Backhoe digger shovels, crane shovels, front loader shovels
-
- Benefits:
- Long service life
-
- Details:
- Highly wear-resistant hardox material cut from the plate
-
- Technical information:
- Hardox can be welded either electrically or using the MIG/MAG process. It is important that the material to be welded is pre-heated to between 50 and 75°C and that the welded material is cooled in a controlled manner
- Electrical: a basic welding rod is recommended, but a standard welding rod can also be used
- MIG-MAG: SG3 wire is recommended, but standard SG2 wire can also be used
| |
|---|
| BEdge strip total width | 250 mm | |
|---|
| B1Sloping horizontal width | 37 mm | |
|---|
| CThickness | 25 mm | |
|---|
| C1Min. working thickness | 8 mm | |
|---|
| Edge strip total length | 3000 mm | |
|---|
| Hardness HB | 400 | |
|---|
| Weight | 142.5 kg | |
|---|
