KT300353HX

Part number
KT300353HX
EAN5700036774788
Unit
Each
Details
Highly wear-resistant Hardox® material cut from the plate
Application range
Backhoe digger shovels, crane shovels, front loader shovels
Technical info
  • Hardox® can be welded either electrically or using the MIG/MAG process. It is important that the material to be welded is pre-heated to between 50 and 75°C and that the welded material is cooled in a controlled manner
  • Electrical: a basic welding rod is recommended, but a standard welding rod can also be used
  • MIG-MAG: SG3 wire is recommended, but standard SG2 wire can also be used
Benefits
Long service life
Long description
  • Application:
  • Backhoe digger shovels, crane shovels, front loader shovels
  • Benefits:
  • Long service life
  • Details:
  • Highly wear-resistant hardox material cut from the plate
  • Technical information:
  • Hardox can be welded either electrically or using the MIG/MAG process. It is important that the material to be welded is pre-heated to between 50 and 75°C and that the welded material is cooled in a controlled manner
  • Electrical: a basic welding rod is recommended, but a standard welding rod can also be used
  • MIG-MAG: SG3 wire is recommended, but standard SG2 wire can also be used
BEdge strip total width
300 mm
B1Sloping horizontal width
50 mm
CThickness
35 mm
C1Min. working thickness
12 mm
Edge strip total length
3000 mm
Hardness HB
400
Weight
238.2 kg