| Part number | 103016025040 | |
|---|
| EAN | 8716106745418 | |
|---|
| Unit | Each | |
|---|
| Details | The rubber seals in their installed condition between the media tube and the casing tube or core drill and the two profiled steel rings are pressed together by tightening the nuts: the rubber securely closes the annular gap between the media tube (cable or cable conduit) and the casing tube or core drill Show more | |
|---|
| Application range | - For installation in special fibre cement casing tubes / in core drills
- Containers and tank farms in agriculture, water supply, heating and district heat conduction plants, swimming pools
- Containers and tank farms, as well as for gas lines or in shelters
- Use in shafts, sewage treatment plants, black and white tanks
| |
|---|
| Properties | - Up to D1 = 350 mm with DPS (double profile system)
- Asymmetric profiling of the steel rings causes special orientation of the contact pressure on the rubber seals, gently in the direction of the media line, strongly in the direction of the casing tube
- Deflections of media pipes up to 8° possible
- Double sealing
- Can be used with pressing and non-pressing water
- Recording of axial movements
| |
|---|
| Benefits | Water-tight and gas-tight sealing | |
|---|
| dInside diameter (width) | 165 mm | |
|---|
| D1Outside diameter (width) | 250 mm | |
|---|
| LDMounting length | 90 mm | |
|---|
| Material | Stainless steel A4 | |
|---|
