| Part number | DN050VNCN | |
|---|
| EAN | | |
|---|
| Unit | Each | |
|---|
| Details | - Intermediate knife gate valve actuated by dual-action pneumatic cylinder
- Pipe boot sealed by sealing on the narrow side of the plate
- Adjustable transverse seal prevents medium from leaking externally
- Blade-shaped valve plate shears off solid objects
- No deposits thanks to scraper strips and special plate geometry
| |
|---|
| Application range | - Biogas plants: food scraps, manure, renewables (renewable raw materials) etc.
- Wastewater treatment plants: untreated wastewater, raw sludge, faecal matter etc.
- Sugar industry: beet washing plant etc.
- Food industry: conveyors for cereals, vegetables etc.
- Pulp and paper industry
| |
|---|
| Properties | - Control pressure 6 to 8 bar in cylinder
- Cushioned pneumatic cylinder prevents pressure shock
- Housing material: GG25 with epoxy plastic coating EKB
- Upper construction: stainless steel with epoxy plastic coating EKB
- Plate: stainless steel 1.4404
- Spindle/piston rod: stainless steel 1.4404
- Seal: EPDM
- Temperature range: -20 to +130°C
| |
|---|
| Technical info | - Flanged hole: PN 10/16 - tested according to EN 1092/ISO 7005
- Length: EN 558-1/ISO 5752 Series 20
- Other designs can be supplied upon request
| |
|---|
| Benefits | - 100% waterproof
- Long service life
- High level of operational reliability
| |
|---|
| DNPassage hole nominal diameter | 50 mm | |
|---|
| Max working pressure | 10 BAR | |
|---|
| DFlange outside diameter | 165 mm | |
|---|
| KFlange mounting bolts/holes distance | 125 mm | |
|---|
| ØFlange mounting bolts/holes thread diameter | M16 | |
|---|
| BLFlange thickness | 43 mm | |
|---|
| HPassage hole centre to lever end distance | 407 mm | |
|---|
| ZCylinder outside diameter | 100 mm | |
|---|
| ACylinder total width | 140 mm | |
|---|
| GCylinder mounting thread diameter | 1/4 Inch | |
|---|
