Print
GIR50DO2RS
| Part number | GIR50DO2RS | |
|---|---|---|
| EAN | 8052461091310 | |
| Unit | Each | |
| Application range |
| |
| Properties |
| |
| b. | 6 ° | |
| B | 35 mm | |
| C1 | 30 mm | |
| D1 | 55.9 mm | |
| D2 | 112 mm | |
| D3 | 45 x 3 mm | |
| D | 75 mm | |
| Hole diameter | 50 mm | |
| Hub Width | 35 mm | |
| Thread | M45x3 | |
| Surface treatment | Zinc-plated | |
| Type |
| |
| Diameter | 5.000 mm | |
| Inside diameter | 50 mm | |
| Length L7 | 59 mm | |
| Height inner ring | 35 mm | |
| Outside diameter | 75 mm | |
| Outside diameter innerring | 55.9 mm | |
| Width | 112 mm | |
| Distance basis center shaft | 160 mm | |
| Thread length | 69 mm | |
| Length | 216 mm | |
| Outside diameter basis | 65 mm | |
| Height house | 30 mm | |
| Diameter D4 | 62 mm | |
| Length L5 | 20 mm | |
| Edge degrees | 6 ° | |
| Thread direction | Right |