Part number | MEC6500A | |
---|
EAN | | |
---|
Unit | Each | |
---|
Details | - Each pump is subjected to a final check in the factory, in which the vacuum, compression and lubrication are tested, among other factors
- A test report relating to the serial number is drawn up for each pump
| |
---|
Application range | These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks | |
---|
Properties | - These pumps can generate both positive pressure and vacuum
- Oil to be used for lubricating the vanes: genuine oil from B. P. Item number: BP5070
| |
---|
Technical info | - Composition of the item numbers: MEC = series, 8000 = type, M = indirect drive 540 rpm, A = automatic lubrication
- On pumps without automatic lubrication (no "A" in the item number), the pump is equipped with a forced lubrication system that is adjusted using dripper nozzles
- On pumps without automatic lubrication, the quantity of lubrication oil is set in the factory and cannot be changed without a tool
- In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation
- Pumps with indirect drive (M) must be driven anti-clockwise
- The direction of rotation is determined when the axle to be driven is aligned with the observer
- If the pump has a direct drive (for example, by a tractor unit) it must be driven anti-clockwise
| |
---|
Benefits | As B.P. pumps are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed | |
---|
Nominal volume flow rate | 7000 l/min | |
---|
Drive type | PTO 540 rpm | |
---|
Direction of rotation | Counter-clockwise (CCW) | |
---|
Ballast air injection system | No | |
---|
Consists of | - These pumps are supplied with standard vanes ("Long-life" vanes available on request)
- Without pressure relief valve and vacuum valve
- The pumps are delivered without lubrication oil (BP5070)
- Including PTO shaft cover
| |
---|
Lubrication system type | Automatic | |
---|
Vane type | Standard | |
---|
Crash protection system | No | |
---|
Max vacuum | 0.9 BAR | |
---|
Max. relative pressure | 1.5 BAR | |
---|
Power requirement for max. pressure | 24 kW | |
---|
Power requirement for max. vacuum | 12.5 kW | |
---|
Diameter of hose connection | 60 mm | |
---|
Safety valve connection diameter | 1-1/2 Inch | |
---|
ETotal length | 693 mm | |
---|
OTotal width | 410 mm | |
---|
HHeight | 637 mm | |
---|
FMounting holes diameter | 15 mm | |
---|
Mounting holes distance | | |
---|
AMounting holes to shaft end distance | 276 mm | |
---|
GMounting holes to end distance | 130 mm | |
---|
Shaft centre to left side end distance | 195 mm | |
---|
Shaft centre to right side end distance | 215 mm | |
---|
Shaft diameter | 1-3/8 Inch | |
---|
Max. shaft rotation | 600 r/min | |
---|
Weight | 146 kg | |
---|