Part number | STAR60MA | |
---|
EAN | | |
---|
Unit | Each | |
---|
Application range | These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks | |
---|
Properties | These pumps can generate both positive pressure and vacuum | |
---|
Technical info | - Composition of the item numbers: STAR = series, 72 = type, M = indirect drive 540 rpm, A = automatic lubrication
- On pumps without automatic lubrication (no "A" in the item number), the pump is equipped with a forced lubrication system that is adjusted using dripper nozzles
- On pumps without automatic lubrication, the quantity of lubrication oil is set in the factory and cannot be changed without a tool
- In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation
- Pumps with indirect drive (M) must be driven anti-clockwise
- The direction of rotation is determined when the axle to be driven is aligned with the observer
- If the pump has a direct drive (for example, by a tractor unit) it must be driven anti-clockwise
- Oil to be used for lubricating the vanes: genuine oil from B. P. (item number BP5070)
- STAR replaces the Agri- and Euro series
| |
---|
Nominal volume flow rate | 10800 l/min | |
---|
Drive type | PTO 540 rpm | |
---|
Direction of rotation | Counter-clockwise (CCW) | |
---|
Ballast air injection system | No | |
---|
Consists of | - Including PTO shaft cover
- Including vacuum valve
- Without pressure relief valve (item 0200013)
- These pumps are supplied with standard vanes Long-life vanes available on request
- Including swivelling connection pipes
- The pumps are delivered without lubrication oil (item BP5070)
| |
---|
Lubrication system type | Automatic | |
---|
Vane type | Standard | |
---|
Crash protection system | No | |
---|
Max vacuum | 0.9 BAR | |
---|
Max. relative pressure | 1.5 BAR | |
---|
Power requirement for max. pressure | 30 kW | |
---|
Power requirement for max. vacuum | 26 kW | |
---|
Safety valve connection diameter | 2 Inch | |
---|
Depression valve connection diameter | 1-1/2 Inch | |
---|
ATotal length | 761 mm | |
---|
BTotal width | 490 mm | |
---|
CHeight | 540 mm | |
---|
PRotor housing height | 326 mm | |
---|
OUpper housing height | 214 mm | |
---|
LMounting holes diameter | 18 mm | |
---|
IMounting holes distance | | |
---|
NMounting holes to shaft end distance | 286 mm | |
---|
MMounting holes to end distance | 204 mm | |
---|
KShaft centre to left side end distance | 220 mm | |
---|
XShaft centre to right side end distance | 220 mm | |
---|
Shaft diameter | 1-3/8 Inch | |
---|
Max. shaft rotation | 600 r/min | |
---|
Weight | 209 kg | |
---|