Part number | STAR84PRA | |
---|
EAN | | |
---|
Unit | Each | |
---|
Application range | These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks | |
---|
Properties | These pumps can generate both positive pressure and vacuum | |
---|
Technical info | - Composition of item numbers: STAR = series, 72 = type, P = pulley drive, R = clockwise rotation, A = automatic lubrication
- On pumps without automatic lubrication (no "A" in the item number), the pump is equipped with a forced lubrication system that is adjusted using dripper nozzles • Forced lubrication available on request
- On pumps without automatic lubrication, the quantity of lubrication oil is set in the factory and cannot be changed without a tool
- In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation
- Pumps with pulley drive rotate clockwise. Anti-clockwise rotation available on request
- The direction of rotation is determined when the axle to be driven is aligned with the observer
- Oil to be used for lubricating the vanes: genuine oil from B. P. (item number BP5070)
- STAR replaces the Agri- and Euro series
-
| |
---|
Nominal volume flow rate | 14800 l/min | |
---|
Drive type | Pulley | |
---|
Direction of rotation | Clockwise (CW) | |
---|
Ballast air injection system | No | |
---|
Consists of | - Without pulley
- Including vacuum valve
- Without pressure relief valve (item 0200013)
- These pumps are supplied with standard vanes Long-life vanes available on request
- Including swivelling connection pipes
- The pumps are delivered without lubrication oil (item BP5070)
| |
---|
Lubrication system type | Automatic | |
---|
Vane type | Standard | |
---|
Crash protection system | No | |
---|
Max vacuum | 0.9 BAR | |
---|
Max. relative pressure | 1.5 BAR | |
---|
Power requirement for max. vacuum | 29 kW | |
---|
ETotal length | 90 mm | |
---|
OTotal width | 490 mm | |
---|
GHeight | 540 mm | |
---|
FMounting holes diameter | 18 mm | |
---|
B,LMounting holes distance | | |
---|
AMounting holes to shaft end distance | 289 mm | |
---|
CMounting holes to end distance | 269 mm | |
---|
MShaft centre to left side end distance | 220 mm | |
---|
NShaft centre to right side end distance | 220 mm | |
---|
IShaft centre to bottom distance | 196 mm | |
---|
Shaft length | 90 mm | |
---|
Max. shaft rotation | 1200 r/min | |
---|
Weight | 239 kg | |
---|
Additional info | Pump has at front and back side adjustable outlet. | |
---|