Part number | MEC2000H | |
---|
EAN | | |
---|
Unit | Each | |
---|
Details | - Each pump is subjected to a final check in the factory, in which the vacuum, compression and lubrication are tested, among other factors
- A test report relating to the serial number is drawn up for each pump
| |
---|
Application range | These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks | |
---|
Properties | These pumps can generate both positive pressure and vacuum | |
---|
Technical info | - Composition of the part numbers: MEC = series, 8000 = type, H = hydraulic drive
- On pumps without automatic lubrication (no "A" in the item number), the pump is equipped with a forced lubrication system that is adjusted using dripper nozzles Automatic lubrication available on request
- On pumps without automatic lubrication, the quantity of lubrication oil is set in the factory and cannot be changed without a tool
- In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation
- Hydraulically driven pumps rotate clockwise. Anti-clockwise rotation available on request
- The direction of rotation is determined when the axle to be driven is aligned with the observer
- Oil to be used for lubricating the vanes: genuine oil from B. P. (item number BP5070)
-
| |
---|
Benefits | As B.P. pumps are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed | |
---|
Nominal volume flow rate | 2750 l/min | |
---|
Drive type | Hydraulic | |
---|
Direction of rotation | Clockwise (CW) | |
---|
Ballast air injection system | No | |
---|
Consists of | - These pumps are supplied with standard vanes. Long-life vanes available on request
- Without pressure relief valve and vacuum valve
- The pumps are delivered without lubrication oil (item BP5070)
- Including hydraulic base for mounting the hydraulic motor
- Without hydraulic motor and key bush
| |
---|
Lubrication system type | Forced | |
---|
Vane type | Standard | |
---|
Crash protection system | No | |
---|
Max vacuum | 0.9 BAR | |
---|
Max. relative pressure | 1.5 BAR | |
---|
Power requirement for max. pressure | 7 kW | |
---|
Power requirement for max. vacuum | 4.9 kW | |
---|
Hydraulic motor required capacity | 38.5 l/min | |
---|
DDiameter of hose connection | 45 mm | |
---|
Safety valve connection diameter | 1-1/4 Inch | |
---|
ATotal length | 456 mm | |
---|
BTotal width | 342 mm | |
---|
CHeight | 480 mm | |
---|
HMounting holes diameter | 15 mm | |
---|
IMounting holes distance | | |
---|
EMounting holes to shaft end distance | 194 mm | |
---|
GMounting holes to end distance | 90 mm | |
---|
KShaft centre to left side end distance | 164 mm | |
---|
XShaft centre to right side end distance | 178 mm | |
---|
LShaft centre to bottom distance | 142 mm | |
---|
Max. shaft rotation | 1400 r/min | |
---|
Weight | 69 kg | |
---|