Support
Log in
Print

5090N3860

Part number
5090N3860
EAN
Unit
Each
Long description
Clamp-on yokes splined, series SH
Details
  • Conical pin provides good clamping effect
  • Housing without slot
Pros
  • Slack-free installation
  • Clamp bolt is not stretched under load
Product details
  • Do not use yoke on tractor side with machines produced after 2005 according to safety standard EN12965
  • Conical screw ensures good hold
  • Housing without saw cut
Application range
  • Rotary tillers
  • Shredder
  • Wood shredders
  • Stump grinding
Properties
Clamp cone bolt
Technical info
In accordance with safety standard EN12965, do not use yoke on tractor side for machines which were produced after 2005
Benefits
  • Assembly with no play
  • Clamping pin is not loaded for stretching
Type
Clamp bolt
Outside connection diameter
42 mm
Outside connection diameter
1-3/4 Inch
Consists of
  • Fork
  • Conical clamping pin
Connection number of splines/grooves
20
Shaft size code
SH
Locking system
Clamp bolt (interfering)
Cross connection diameter
42 mm
Cross length
107.5 mm
Locking bolt to cross bush center distance
124 mm
DLocking bolt to connection end distance
35 mm