DIN 435 washers with 14% angle for I-bracket, zinc-plated
Browse to product table
| Long description | Square taper washer, 14%, for I profile, DIN 435. |
|---|
Product | Unit | Inside diameter d1 | Thickness h | Designed for thread | Width l | Length | Surface treatment | Material | DIN Standard | Weight per 100 pieces |
|---|---|---|---|---|---|---|---|---|---|---|
| Each | 8 mm | 4.6 mm / 1.5 mm | M8 | 22 mm | 22 mm | Zinc-plated | Steel | 435 | 1 KG | |
| Each | 10 mm | 4.6 mm / 1.5 mm | M10 | 22 mm | 22 mm | Zinc-plated | Steel | 435 | 1 KG | |
| Each | 12 mm | 6.2 mm / 2 mm | M12 | 26 mm | 26 mm | Zinc-plated | Steel | 435 | 2 KG | |
| Each | 16 mm | 7.5 mm / 2.5 mm | M16 | 32 mm | 32 mm | Zinc-plated | Steel | 435 | 3.4 KG | |
| Each | 16 mm | 7.5 mm / 2.5 mm | M16 | 32 mm | 32 mm | Zinc-plated | Steel | 435 | ||
| Each | 20 mm | 9.2 mm / 3 mm | M20 | 40 mm | 40 mm | Zinc-plated | Steel | 435 | 6.6 KG | |
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||