Application range	Series 500 is suitable for machines up to 16 hp 700 Series is suitable for machines up to 44 hp 900 Series is suitable for machines up to 80 hp
Technical info	Chisels: Chisel can be rotated 120º three times, allowing full tip to be used as a milling surface The bit plate features a carbide head Type THR and THG chisels are equipped with self-locking nuts which fit in the LoPro holder and feature tapered rings Holders: Holders can be mounted on both sides of the milling wheel The holders have a thread on one side and a recessed opening on the other, into which the special Smartbolt bolts are inserted The milling bits can be placed on both sides of the holder Bolts: The bolts have a groove on the bottom to allow broken bolts to be removed easily using a screwdriver

Product	Unit	Thread type	Outside diameter	Measurements type	Thread diameter
Unbranded SCT500THG Chisel green with nut	Each	UNC	17.5 mm	Imperial	5/16 Inch
Unbranded SCT500SPACER 10 type 500 conical rings	Set
Unbranded SCT500LPS Holder straight	Each	UNF		Imperial	5/8 Inch
Unbranded SCT700THG Chisel green with nut	Each	UNC	19 mm	Imperial	3/8 Inch
Unbranded SCT700NUT Self-Locking nuts 10 type 700	Set	UNC		Imperial	3/8 Inch
Unbranded SCT700SPACER 10 type 700 conical rings	Set
Unbranded SCT700LPA Holder bent	Each	UNF		Imperial	5/8 Inch
Unbranded SCT700LPS Holder straight	Each	UNF		Imperial	5/8 Inch
Unbranded SCT900THG Chisel green with nut	Each	UNC	22.2 mm	Imperial	7/16 Inch

Greenteeth system for LoPro series 500, 700 and 900

Media (1)