Diaphragm accumulators screwed

Browse to product table

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!

Request account

Find a Kramp dealer

Tailored advice from our specialists
More than 500.000 products
Up-to-date information on current stock and delivery times

Pros	The accumulator can be filled to the correct pressure if desired Complies with Pressure Equipment Directive (PED) Long service life
Product details	Fit the accumulators vertically with the gas valve pointing upwards Fill with nitrogen only The volume indicator indicates the total volume (V0) of the accumulator The ratio of operating pressure to initial stressing pressure must not exceed 6:1 The initial stressing pressure must not exceed 90% of working pressure Field of application: agriculture, forestry, construction machinery, suspension systems and to compensate hydraulic leakage

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!

Request account

Find a Kramp dealer

Tailored advice from our specialists
More than 500.000 products
Up-to-date information on current stock and delivery times

Product	Unit	Volume	Pre-charge default pressure	Max. working pressure	Inside thread diameter	Pitch of thread	Gas valve thread diamter	Gas valve thread type	Total length	Outside width/diameter	Material	Membrane material	Surface treatment	Type	Weight	Admissible pressure ratio	Classification code	Min. working temperature	Max. working temperature
SAIP L01 Accumulator L 01/ 0-210BAR	Each	100 cm³	30 BAR	210 BAR	M18	1.50 mm	5/8 Inch	UNF	128 mm	73 mm	Steel	Nitrile rubber [NBR]	Primed	Membrane	1,9 kg
SAIP LAV01 Accumulator	Each	100 cm³	30 BAR	330 BAR			5/8 Inch	UNF	128 mm	73 mm	Steel	Nitrile rubber [NBR]	Primed	Membrane	1,9 kg
SAIP L10160 Accumulator 0.1L 210 bar	Each	100 cm³	60 BAR	210 BAR	M18	1.50 mm	5/8 Inch	UNF	128 mm	73 mm	Steel	Nitrile rubber [NBR]	Primed	Membrane
SAIP L035 Accumulator L 35/ 0-210 BAR	Each	350 cm³	30 BAR	210 BAR	M18	1.50 mm	5/8 Inch	UNF	157 mm	94 mm	Steel	Nitrile rubber [NBR]	Primed	Membrane	2,9 kg	6:1	I
SAIP LAV035 Accumulator	Each	350 cm³	30 BAR	330 BAR	M18	1.50 mm	5/8 Inch	UNF	157 mm	94 mm	Steel	Nitrile rubber [NBR]	Primed	Membrane	2,9 kg	6:1	I
SAIP LAV03580 Accumulator 0.35L-330	Each	350 cm³	80 BAR	330 BAR	M18	1.50 mm	5/8 Inch	UNF	157 mm	94 mm	Steel	Nitrile rubber [NBR]	Primed	Membrane	2,9 kg		I
SAIP LAV050 Accumulator 0.5L - 210 bar	Each	500 cm³	30 BAR	210 BAR	M18	1.50 mm	5/8 Inch	UNF	172 mm	116 mm	Steel	Nitrile rubber [NBR]	Primed	Membrane	4,1 kg	6:1	I	-15 °C	80 °C
SAIP AMP10580 Accumulator 0.5-l-330/p0=80	Each	500 cm³	80 BAR	330 BAR	M18	1.50 mm	5/8 Inch	UNF	172 mm	94 mm	Steel	Nitrile rubber [NBR]	Primed	Membrane	4,1 kg		I

Volume (cubic centimetre)	Pre-charge default pressure (bar)	Max. working pressure (bar)
100	30	210

Volume (cubic centimetre)	Pre-charge default pressure (bar)	Max. working pressure (bar)
100	30	330

Volume (cubic centimetre)	Pre-charge default pressure (bar)	Max. working pressure (bar)
100	60	210

Volume (cubic centimetre)	Pre-charge default pressure (bar)	Max. working pressure (bar)
350	30	210

Volume (cubic centimetre)	Pre-charge default pressure (bar)	Max. working pressure (bar)
350	30	330

Volume (cubic centimetre)	Pre-charge default pressure (bar)	Max. working pressure (bar)
350	80	330

Volume (cubic centimetre)	Pre-charge default pressure (bar)	Max. working pressure (bar)
500	30	210

Volume (cubic centimetre)	Pre-charge default pressure (bar)	Max. working pressure (bar)
500	80	330