Hammer control valve FPEXCH-EV 12V

Browse to product table

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!

Request account

Find a Kramp dealer

Tailored advice from our specialists
More than 500.000 products
Up-to-date information on current stock and delivery times

Product details	Pressure increase : 95 bar per turn Max backpressure on T: 1.5 bar Max leakage: 3 L/min To ensure the correct operation of the hydrostat when the electric valve is open, it is important to maintain a backpressure of at least 7.5 bar on the regulated line (P). If this backpressure cannot be achieved, a check valve must be installed to guarantee the required backpressure. To avoid deflection of the valve body, which could prevent the internal spool from functioning correctly, it is recommended to use 3 equal spacers (metal washers) when positioning and tightening the valve. Place one spacer on each fixing hole between the valve body and the supporting structure.

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!

Request account

Find a Kramp dealer

Tailored advice from our specialists
More than 500.000 products
Up-to-date information on current stock and delivery times

Product	Unit	Min. flow rate	Min. working pressure	Max working pressure	Connection thread diameter	Connection 2, thread diameter	Total width (diameter)	Total length
FluidPress FPEXCHEV1234S35 Hammer valve and safety 3-way	Each	200 l/min	100 BAR	350 BAR	3/4 Inch	1/4 Inch	100 mm	184 mm

Min. flow rate (litre per minute)	Min. working pressure (bar)	Max working pressure (bar)
200	100	350