Tlačiť
Rohrschellen - Typ RS - einfach - schwere Ausführung - Polyamid (PA)
Перейти к списку товаров
Заинтересованы в покупке продуктов?
Хотите узнать больше о ценах или заказать напрямую? Это возможно, когда вы связаны с дилером в вашем регионе. Хотите продавать товары через Kramp в качестве дилера? Тогда зарегистрируйтесь!
- Индивидуальный совет от наших специалистов
- Актуальная информация о текущих запасах и сроках доставки
- Более 500.000 товаров
Заинтересованы в покупке продуктов?
Хотите узнать больше о ценах или заказать напрямую? Это возможно, когда вы связаны с дилером в вашем регионе. Хотите продавать товары через Kramp в качестве дилера? Тогда зарегистрируйтесь!
- Индивидуальный совет от наших специалистов
- Актуальная информация о текущих запасах и сроках доставки
- Более 500.000 товаров
Товар | Единица измерения | Serie | Код группы | Cover plate type | Состоит из | Диаметр | Диаметр | Материал корпуса | Material (plate) | Стандарт DIN | Ширина B | Высота C | Ширина монтажной пластины | Расстояние между отверстиями | Диаметр резьбы болта | Длина болта | Мин. рабочая температура | Макс. рабочая температура | Цвет | цвет | Сборка | Норма | Размер |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| штука | Heavy | 1 | Cover Plate | Хомут состоит из: / 2 половин / Крышки / Опорной плиты / Винтов | 6 mm | 0.236-0.236 Inch | Полиамид | Сталь | 3015/2 | 56 mm | 32 mm | 55 mm | 33 mm | M10 | 40 mm | -40 °C | 120 °C | черный | черный | 1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend Показать больше | DIN 3015/2 | 1 Inch | |
| штука | Heavy | 1 | Cover Plate | Хомут состоит из: / 2 половин / Крышки / Опорной плиты / Винтов | 8 mm | 0.314-0.314 Inch | Полиамид | Сталь | 3015/2 | 56 mm | 32 mm | 55 mm | 33 mm | M10 | 40 mm | -40 °C | 120 °C | черный | черный | 1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend Показать больше | DIN 3015/2 | 1 Inch | |
| штука | Heavy | 1 | Cover Plate | Хомут состоит из: / 2 половин / Крышки / Опорной плиты / Винтов | 10 mm | 0.393-0.393 Inch | Полиамид | Сталь | 3015/2 | 56 mm | 32 mm | 55 mm | 33 mm | M10 | 40 mm | -40 °C | 120 °C | черный | черный | 1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend Показать больше | DIN 3015/2 | 1 Inch | |
| штука | Heavy | 1 | Cover Plate | Хомут состоит из: / 2 половин / Крышки / Опорной плиты / Винтов | 12 mm | 0.472-0.472 Inch | Полиамид | Сталь | 3015/2 | 56 mm | 32 mm | 55 mm | 33 mm | M10 | 40 mm | -40 °C | 120 °C | черный | черный | 1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend Показать больше | DIN 3015/2 | 1 Inch | |
| штука | Heavy | 1 | Cover Plate | Хомут состоит из: / 2 половин / Крышки / Опорной плиты / Винтов | 14 mm | 0.551-0.551 Inch | Полиамид | Сталь | 3015/2 | 56 mm | 32 mm | 55 mm | 33 mm | M10 | 40 mm | -40 °C | 120 °C | черный | черный | 1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend Показать больше | DIN 3015/2 | 1 Inch | |
| штука | Heavy | 1 | Cover Plate | Хомут состоит из: / 2 половин / Крышки / Опорной плиты / Винтов | 15 mm | 0.59-0.59 Inch | Полиамид | Сталь | 3015/2 | 56 mm | 32 mm | 55 mm | 33 mm | M10 | 40 mm | -40 °C | 120 °C | черный | черный | 1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend Показать больше | DIN 3015/2 | 1 Inch | |
| штука | Heavy | 1 | Cover Plate | Хомут состоит из: / 2 половин / Крышки / Опорной плиты / Винтов | 16 mm | 0.629-0.629 Inch | Полиамид | Сталь | 3015/2 | 56 mm | 32 mm | 55 mm | 33 mm | M10 | 40 mm | -40 °C | 120 °C | черный | черный | 1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend Показать больше | DIN 3015/2 | 1 Inch | |
| штука | Heavy | 1 | Cover Plate | Хомут состоит из: / 2 половин / Крышки / Опорной плиты / Винтов | 18 mm | 0.708-0.708 Inch | Полиамид | Сталь | 3015/2 | 56 mm | 32 mm | 55 mm | 33 mm | M10 | 40 mm | -40 °C | 120 °C | черный | черный | 1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend Показать больше | DIN 3015/2 | 1 Inch | |
| штука | Heavy | 2 | Cover Plate | Хомут состоит из: / 2 половин / Крышки / Опорной плиты / Винтов | 20 mm | 0.787-0.787 Inch | Полиамид | Сталь | 3015/2 | 71 mm | 48 mm | 70 mm | 45 mm | M10 | 60 mm | -40 °C | 120 °C | черный | черный | 1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend Показать больше | DIN 3015/2 | 2 Inch | |
| штука | Heavy | 2 | Cover Plate | Хомут состоит из: / 2 половин / Крышки / Опорной плиты / Винтов | 22 mm | 0.866-0.866 Inch | Полиамид | Сталь | 3015/2 | 71 mm | 48 mm | 70 mm | 45 mm | M10 | 60 mm | -40 °C | 120 °C | черный | черный | 1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend Показать больше | DIN 3015/2 | 2 Inch | |
| штука | Heavy | 2 | Cover Plate | Хомут состоит из: / 2 половин / Крышки / Опорной плиты / Винтов | 25 mm | 0.984-0.984 Inch | Полиамид | Сталь | 3015/2 | 71 mm | 48 mm | 70 mm | 45 mm | M10 | 60 mm | -40 °C | 120 °C | черный | черный | 1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend Показать больше | DIN 3015/2 | 2 Inch | |
| Комплект | Heavy | 2 | Cover Plate | Хомут состоит из: / 2 половин / Крышки / Опорной плиты / Винтов | 28 mm | 1.102-1.102 Inch | Полиамид | Сталь | 3015/2 | 71 mm | 48 mm | 70 mm | 45 mm | M10 | 60 mm | -40 °C | 120 °C | черный | черный | 1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend Показать больше | DIN 3015/2 | 2 Inch | |
| штука | Heavy | 3 | Cover Plate | Хомут состоит из: / 2 половин / Крышки / Опорной плиты / Винтов | 30 mm | 1.181-1.181 Inch | Полиамид | Сталь | 3015/2 | 86 mm | 60 mm | 85 mm | 45 mm | M10 | 70 mm | -40 °C | 120 °C | черный | черный | 1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend Показать больше | DIN 3015/2 | 3 Inch | |
| штука | Heavy | 3 | Cover Plate | Хомут состоит из: / 2 половин / Крышки / Опорной плиты / Винтов | 35 mm | 1.377-1.377 Inch | Полиамид | Сталь | 3015/2 | 86 mm | 60 mm | 85 mm | 60 mm | M10 | 70 mm | -40 °C | 120 °C | черный | черный | 1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend Показать больше | DIN 3015/2 | 3 Inch | |
| штука | Heavy | 3 | Cover Plate | Хомут состоит из: / 2 половин / Крышки / Опорной плиты / Винтов | 38 mm | 1.496-1.496 Inch | Полиамид | Сталь | 3015/2 | 86 mm | 60 mm | 85 mm | 60 mm | M10 | 70 mm | -40 °C | 120 °C | черный | черный | 1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend Показать больше | DIN 3015/2 | 3 Inch | |
| штука | Heavy | 3 | Cover Plate | Хомут состоит из: / 2 половин / Крышки / Опорной плиты / Винтов | 42 mm | 1.653-1.653 Inch | Полиамид | Сталь | 3015/2 | 86 mm | 60 mm | 85 mm | 60 mm | M10 | 70 mm | -40 °C | 120 °C | черный | черный | 1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend Показать больше | DIN 3015/2 | 3 Inch | |
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||