Part number | MEC9000MAV | |
---|
EAN | | |
---|
Unit | Each | |
---|
Details | - The MEC II-series pumps have an automatic protection system. So, for example, if a vane breaks, the rotor and rotor housing can be protected by the rotor—including the flange mountings—being pushed downwards
- MEC II-series pumps are supplied with long-life (heat-resistant) vanes as standard
- MEC II-series pumps feature a temperature meter to enable the temperature to be read during operation
- A maintenance hatch can be used to determine the wear condition of the vanes, indicating when the vanes need to be replaced
- Each pump is subjected to a final check in the factory, in which the vacuum, compression and lubrication are tested, among other factors
- A test report relating to the serial number is drawn up for each pump
| |
---|
Application range | These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks | |
---|
Properties | These pumps can generate both positive pressure and vacuum | |
---|
Technical info | - Structure of item number: MEC = series, 9000 = type, MAV = direct drive, 1000 rpm
- The pump is equipped with force-feed lubrication, which is set using dripper nozzles
- In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation
- Pumps with indirect drive (M) must be driven anti-clockwise
- The direction of rotation is determined when the axle to be driven is aligned with the observer
- If the pump has a direct drive (for example, by a tractor unit) it must be driven anti-clockwise
| |
---|
Benefits | - Minimum repair costs thanks to the unique automatic protection system
- As pumps from B.P. are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed
| |
---|
Nominal volume flow rate | 9030 l/min | |
---|
Drive type | PTO 1000 rpm with gearbox | |
---|
Direction of rotation | Counter-clockwise (CCW) | |
---|
Ballast air injection system | No | |
---|
Consists of | - Including PTO shaft cover
- Without pressure relief valve (item 0200013) and vacuum valve (item 0155513)
- The pumps are delivered without lubrication oil (item BP5070)
| |
---|
Lubrication system type | Forced | |
---|
Vane type | Long life | |
---|
Crash protection system | Yes | |
---|
Max vacuum | 0.95 BAR | |
---|
Max. relative pressure | 1.5 BAR | |
---|
Power requirement for max. pressure | 36 kW | |
---|
Power requirement for max. vacuum | 17 kW | |
---|
D,PDiameter of hose connection | 80 mm | |
---|
Safety valve connection diameter | 2 Inch | |
---|
Depression valve connection diameter | 1-1/2 Inch | |
---|
ETotal length | 670 mm | |
---|
OTotal width | 390 mm | |
---|
HHeight | 605 mm | |
---|
FMounting holes diameter | 22 mm | |
---|
B,LMounting holes distance | | |
---|
AMounting holes to shaft end distance | 340 mm | |
---|
CMounting holes to end distance | 192 mm | |
---|
MShaft centre to left side end distance | 195 mm | |
---|
NShaft centre to right side end distance | 195 mm | |
---|
IShaft centre to bottom distance | 69 mm | |
---|
Shaft diameter | 1-3/8 Inch | |
---|
Max. shaft rotation | 1000 r/min | |
---|
Reservoir capacity | 2.5 l | |
---|
Weight | 145 kg | |
---|