Support
Log in
Print

B.P. - MEC II / 1000 rpm driven, with gearbox

Browse to product table

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area.

Find a Kramp dealer
  • Tailored advice from our specialists
  • More than 500.000 products
Details
  • The MEC II-series pumps have an automatic protection system. So, for example, if a vane breaks, the rotor and rotor housing can be protected by the rotor—including the flange mountings—being pushed downwards
  • MEC II-series pumps are supplied with long-life (heat-resistant) vanes as standard
  • MEC II-series pumps feature a temperature meter to enable the temperature to be read during operation
  • A maintenance hatch can be used to determine the wear condition of the vanes, indicating when the vanes need to be replaced
  • Each pump is subjected to a final check in the factory, in which the vacuum, compression and lubrication are tested, among other factors
  • A test report relating to the serial number is drawn up for each pump
Application range
These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks
Properties
These pumps can generate both positive pressure and vacuum
Consists of
  • Including PTO shaft cover
  • Without pressure relief valve (item 0200013) and vacuum valve (item 0155513)
  • The pumps are delivered without lubrication oil (item BP5070)
Technical info
  • Structure of item number: MEC = series, 9000 = type, MAV = direct drive, 1000 rpm
  • The pump is equipped with force-feed lubrication, which is set using dripper nozzles
  • In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation
  • Pumps with indirect drive (M) must be driven anti-clockwise
  • The direction of rotation is determined when the axle to be driven is aligned with the observer
  • If the pump has a direct drive (for example, by a tractor unit) it must be driven anti-clockwise
Benefits
  • Minimum repair costs thanks to the unique automatic protection system
  • As pumps from B.P. are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area.

Find a Kramp dealer
  • Tailored advice from our specialists
  • More than 500.000 products
Product
Unit

Nominal volume flow rate

Drive type

Direction of rotation

Ballast air injection system

Consists of

Lubrication system type

Vane type

Crash protection system

Max vacuum

Max. relative pressure

Power requirement for max. pressure

Power requirement for max. vacuum

Diameter of hose connection

D,P

Safety valve connection diameter

Depression valve connection diameter

Total length

E

Total width

O

Height

H

Mounting holes diameter

F

Mounting holes distance

B,L

Mounting holes to shaft end distance

A

Mounting holes to end distance

C

Shaft centre to left side end distance

M

Shaft centre to right side end distance

N

Shaft centre to bottom distance

I

Shaft diameter

Max. shaft rotation

Reservoir capacity

Weight

MEC11000M
Battioni Pagani
Each
9030 l/min
PTO 1000 rpm with gearbox
Counter-clockwise (CCW)
No
Including PTO shaft cover / Without pressure relief valve (item 0200013) and vacuum valve (item 0155513) / The pumps are delivered without lubrication oil (item BP5070)
Forced
Long life
Yes
0.95 BAR
1.5 BAR
36 kW
17 kW
80 mm
2 Inch
1-1/2 Inch
670 mm
390 mm
605 mm
22 mm
189 mm / 246 mm
340 mm
192 mm
195 mm
195 mm
69 mm
1-3/8 Inch
1000 r/min
2.5 l
145 kg
MEC11000M
Battioni Pagani
Each
11137 l/min
PTO 1000 rpm with gearbox
Counter-clockwise (CCW)
No
Including PTO shaft cover / Without pressure relief valve (item 0200013) and vacuum valve (item 0155513) / The pumps are delivered without lubrication oil (item BP5070)
Forced
Long life
Yes
0.95 BAR
1.5 BAR
40 kW
21 kW
80 mm
2 Inch
1-1/2 Inch
740 mm
390 mm
605 mm
22 mm
247 mm / 246 mm
346 mm
147 mm
195 mm
195 mm
69 mm
1-3/8 Inch
1000 r/min
3 l
160 kg
MEC13500MAV
Battioni Pagani
Each
13845 l/min
PTO 1000 rpm with gearbox
Counter-clockwise (CCW)
No
Including PTO shaft cover / Without pressure relief valve (item 0200013) and vacuum valve (item 0155513) / The pumps are delivered without lubrication oil (item BP5070)
Forced
Long life
Yes
0.95 BAR
1.5 BAR
44 kW
25 kW
100 mm
2 Inch
1-1/2 Inch
830 mm
390 mm
605 mm
22 mm
247 mm / 246 mm
391 mm
192 mm
195 mm
195 mm
69 mm
1-3/8 Inch
1000 r/min
3.5 l
178 kg
Battioni Pagani
Nominal volume flow rate (litre per minute)
Drive type
Direction of rotation
9030
PTO 1000 rpm with gearbox
Counter-clockwise (CCW)
Battioni Pagani
Nominal volume flow rate (litre per minute)
Drive type
Direction of rotation
11137
PTO 1000 rpm with gearbox
Counter-clockwise (CCW)
Battioni Pagani
Nominal volume flow rate (litre per minute)
Drive type
Direction of rotation
13845
PTO 1000 rpm with gearbox
Counter-clockwise (CCW)