Support
Log in
Print

130 Internal Extractors

Browse to product table

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area.

Find a Kramp dealer
  • Tailored advice from our specialists
  • More than 500.000 products
Application range
For extremely tight roller bearings, rings, bushes and shaft seals
Properties
  • HG1.30/1 — HG1.30/5 with thread M10
  • HG1.30/6 — HG1.30/8 with thread M14 x 1.5
Consists of
Individually
Technical info
  • Application:
  • Insert the internal puller into the bearing and screw in the spindle
  • The sharp attachments of the bowls are pressed behind the part being removed
  • Only then position the support brace in place
  • Align both feet parallel to the spindle, thereby creating a rigid unit

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area.

Find a Kramp dealer
  • Tailored advice from our specialists
  • More than 500.000 products
Product
Unit

Type

Number of hooks

Working inner width (diameter) range

Consists of

Material

Weight

Gedore
Each
Inside
2
45-55 mm
Individually
Steel
0.8 kg
Gedore
Each
Inside
2
55-70 mm
Individually
Steel
1.8 kg
Gedore
Type
Number of hooks
Working inner width (diameter) range (millimetre)
Inside
2
45-55
Gedore
Type
Number of hooks
Working inner width (diameter) range (millimetre)
Inside
2
55-70