Arag 3 ways bottom connection electrical bolted ball valve, series 853

Browse to product table

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area.

  • Tailored advice from our specialists
  • More than 500.000 products
Properties
  • Ball positioning seats made from Teflon
  • Internal O-rings made from viton
  • Clamping devices for flange mounting made from stainless steel, protected by the valve housing
Technical info
  • The abbreviation "A" in the item number means: female thread on both sides; "E" means male thread on both sides
  • NO: normally open
  • The valves are designed for the 3-wire function (++-), a supply with 12Vdc:
  • As long as the controller is fed, the valve rotates and moves into position, in which it interrupts the power consumption independently.
  • If the power supply is interrupted, the gear motor brings the ball back to its original position
  • The valves are also compatible with the 2-wire controllers:
  • where the opening/closing movement by reversing the supply polarity is achieved with a double diverter

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area.

  • Tailored advice from our specialists
  • More than 500.000 products
Product
Unit

Ball material

Voltage

Response time

Height from top to center

C

Thread

F

Height from bottom to center

B

Length fitting to centre line

D

Length nipple

L

Length pass through

A

Max. working pressure

Nominal diameter

DN

Width pass through

X

Width suction fitting

Y

Power consumption

Each
Stainless steel 316
12V/ 3 V
2.8 s
186 mm
1''F Inch
42 mm
52 mm
23 mm
101 mm
12 BAR
25 mm
33 mm
38 mm
Each
Stainless steel 316
12 V
2.8 s
171 mm
1 1/4 F Inch
42 mm
58 mm
25 mm
105 mm
12 BAR
32 mm
33 mm
38 mm
3 A
Ball material
Voltage (volt)
Response time (second [unit of time])
Stainless steel 316
12V/ 3
2.8