Print
Countersinks DIN 335 Form C 90° HSS-E (Co 5) Cobalt Alloyed
Browse to product table
Interested in buying products?
Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area.
- Tailored advice from our specialists
- More than 500.000 products
| Long description | Countersink drills are used to apply a slanted side in a drilled hole or deburr it in one operation. Low cutting speed and sufficient cooling will extend the lifespan of the tool and improve the work result. | |
|---|---|---|
| Pros | Countersinking and deburring in one | |
| Product details |
|
Interested in buying products?
Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area.
- Tailored advice from our specialists
- More than 500.000 products
Product | Unit | Countersink diameter | Shank diameter | Cutting material | Countersink angle | DIN standard |
|---|---|---|---|---|---|---|
| Each | 1.5-6.3 mm | 5 mm | Steel HSS-E | 90 ° | 335C | |
| Each | 2.0-8.3 mm | 6 mm | Steel HSS-E | 90 ° | 335C | |
| Each | 2.5-10.4 mm | 6 mm | Steel HSS-E | 90 ° | 335C | |
| Each | 2.8-12.4 mm | 8 mm | Steel HSS-E | 90 ° | 335C | |
| Each | 3.2-16.5 mm | 10 mm | Steel HSS-E | 90 ° | 335C | |
| Each | 3.5-20.5 mm | 10 mm | Steel HSS-E | 90 ° | 335C | |
| Each | 3.8-25.0 mm | 10 mm | Steel HSS-E | 90 ° | 335C | |
| Each | 4.2-31.0 mm | 12 mm | Steel HSS-E | 90 ° | 335C | |
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||