Support
Log in
Print

Electric ball valves - 3 way, series 853

Browse to product table

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area.

Find a Kramp dealer
  • Tailored advice from our specialists
  • More than 500.000 products
Properties
  • Ball positioning seats made from Teflon
  • Internal O-rings made from viton
  • Clamping devices for flange mounting made from stainless steel, protected by the valve housing
Technical info
  • The abbreviation "A" in the item number means: female thread on both sides; "E" means male thread on both sides
  • NO: normally open
  • The valves are designed for the 3-wire function (++-), a supply with 12Vdc:
  • As long as the controller is fed, the valve rotates and moves into position, in which it interrupts the power consumption independently.
  • If the power supply is interrupted, the gear motor brings the ball back to its original position
  • The valves are also compatible with the 2-wire controllers:
  • where the opening/closing movement by reversing the supply polarity is achieved with a double diverter

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area.

Find a Kramp dealer
  • Tailored advice from our specialists
  • More than 500.000 products
Product
Unit

Ball material

Voltage

Response time

Height from top to center

C

Thread

F

Ampere

Height from bottom to center

B

Length fitting to centre line

D

Length nipple

L

Length pass through

A

Max. working pressure

Nominal diameter

DN

Width pass through

X

Width suction fitting

Y
853714A44
Arag
Each
Stainless steel 316
12 V
1.4 s
171 mm
1" Inch
3 A
42 mm
52 mm
23 mm
101 mm
12 BAR
25 mm
33 mm
38 mm
853K16A77
Arag
Each
Stainless steel 316
12V/ 3 A V
2.3 s
178 mm
1 1/2" F Inch
52 mm
63 mm
25 mm
128 mm
10 BAR
40 mm
40 mm
49 mm
853K16E77
Arag
Each
Stainless steel 316
12V/ 3 A V
2.3 s
187 mm
2" M Inch
61 mm
85 mm
27 mm
174 mm
8 BAR
50 mm
57 mm
60 mm
Arag
Ball material
Voltage (volt)
Response time (second [unit of time])
Stainless steel 316
12
1.4
Arag
Ball material
Voltage (volt)
Response time (second [unit of time])
Stainless steel 316
12V/ 3 A
2.3
Arag
Ball material
Voltage (volt)
Response time (second [unit of time])
Stainless steel 316
12V/ 3 A
2.3