Albuz ATI ceramic hollow cone nozzles 80°
Browse to product table
Browse to media
Product | Unit | Manufacturer symbol | Size number | Colour | Spray angle | Tip material | Housing material | Mounting type | Type | Max working pressure | Min working pressure | Nozzle off-centre | ISO colour | Content in sale unit | Extra info |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Each | ATI | 0075 | Pink | 80 ° | Ceramic | Plastic | R11.9 | Air injection hollow cone | 25 BAR | 5 BAR | No | No | 1 pcs | To determine the correct spray pressure, corresponding droplet size, cap spacing and speed, please refer to the flow rate chart in the attachment under Media. | |
| Each | ATI | 01 | Orange | 80 ° | Ceramic | Plastic | R11.9 | Air injection hollow cone | 25 BAR | 5 BAR | No | Yes | 1 pcs | To determine the correct spray pressure, corresponding droplet size, cap spacing and speed, please refer to the flow rate chart in the attachment under Media. | |
| Each | ATI | 15 | Green | 80 ° | Ceramic | Plastic | SW11 | Air injection hollow cone | 25 BAR | 5 BAR | No | Yes | 1 pcs | To determine the correct spray pressure, corresponding droplet size, cap spacing and speed, please refer to the flow rate chart in the attachment under Media. | |
| Each | ATI | 2 | Yellow | 80 ° | Ceramic | Plastic | SW11 | Air injection hollow cone | 25 BAR | 5 BAR | No | Yes | 1 pcs | To determine the correct spray pressure, corresponding droplet size, cap spacing and speed, please refer to the flow rate chart in the attachment under Media. | |
| Each | ATI | 25 | Purple | 80 ° | Ceramic | Plastic | SW11 | Air injection hollow cone | 25 BAR | 5 BAR | No | No | 1 pcs | To determine the correct spray pressure, corresponding droplet size, cap spacing and speed, please refer to the flow rate chart in the attachment under Media. | |
| Each | ATI | 03 | Blue | 80 ° | Ceramic | Plastic | SW11 | Air injection hollow cone | 25 BAR | 5 BAR | No | Yes | 1 pcs | To determine the correct spray pressure, corresponding droplet size, cap spacing and speed, please refer to the flow rate chart in the attachment under Media. | |
| Each | ATI | 04 | Red | 80 ° | Ceramic | Plastic | SW11 | Air injection hollow cone | 25 BAR | 5 BAR | No | Yes | 1 pcs | To determine the correct spray pressure, corresponding droplet size, cap spacing and speed, please refer to the flow rate chart in the attachment under Media. | |
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
