Print
Countersink drills with 3 cutting edges HSS 90°
Browse to product table
| Long description | Countersink drills are used to apply a slanted side in a drilled hole or deburr it in one operation. Low cutting speed and sufficient cooling will extend the lifespan of the tool and improve the work result. | |
|---|---|---|
| Pros | Countersinking and deburring in one | |
| Product details |
|
Product | Unit | Countersink diameter | Shank diameter | Shank type | Length | Cutting material | Countersink angle | Shape code | DIN standard |
|---|---|---|---|---|---|---|---|---|---|
| Each | 1.5-6.3 mm | 5 mm | Cylindrical | 45 mm | Steel HSS-G | 90 ° | C | 335C | |
| Each | 2.0-8.0 mm | 6 mm | Cylindrical | 50 mm | Steel HSS-G | 90 ° | C | 335C | |
| Each | 2.0-8.3 mm | 6 mm | Cylindrical | 50 mm | Steel HSS-G | 90 ° | C | 335C | |
| Each | 2.5-10.0 mm | 6 mm | Cylindrical | 50 mm | Steel HSS-G | 90 ° | C | 335C | |
| Each | 2.5-10.4 mm | 6 mm | Cylindrical | 50 mm | Steel HSS-G | 90 ° | C | 335C | |
| Each | 2.8-11.5 mm | 8 mm | Cylindrical | 56 mm | Steel HSS-G | 90 ° | C | 335C | |
| Each | 2.8-12.4 mm | 8 mm | Cylindrical | 56 mm | Steel HSS-G | 90 ° | C | 335C | |
| Each | 3.2-15.0 mm | 10 mm | Cylindrical | 60 mm | Steel HSS-G | 90 ° | C | 335C | |
| Each | 3.2-16.5 mm | 10 mm | Cylindrical | 60 mm | Steel HSS-G | 90 ° | C | 335C | |
| Each | 3.5-19.0 mm | 10 mm | Cylindrical | 60 mm | Steel HSS-G | 90 ° | C | 335C | |
| Each | 3.5-20.5 mm | 10 mm | Cylindrical | 63 mm | Steel HSS-G | 90 ° | C | 335C | |
| Each | 3.8-23.0 mm | 10 mm | Cylindrical | 67 mm | Steel HSS-G | 90 ° | C | 335C | |
| Each | 3.8-25.0 mm | 10 mm | Cylindrical | 67 mm | Steel HSS-G | 90 ° | C | 335C | |
| Each | 4.2-31.0 mm | 12 mm | 71 mm | Steel HSS-G | 90 ° | 335C | |||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||