Support
Log in
Print

Hand tool, type HAKO

Browse to product table
Pros
  • Saves time
  • Quick installation of protective spirals
Product details
  • Operation :
  • Step 1. Hand-wrap the spiral 1-2 rounds around the hose or hose bundle.
  • Step 2. Lift the spiral onto the pin of the mounting device. The pin points in the mounting direction. The retaining spring follows the mounting device
  • Step 3. By turning the mounting device around the hose, the spiral is now wrapped around the hose
  • When fitting longer spirals, we recommend starting in the middle of the hose.
Product
Unit

Additional info

HAKOP
Safeplast
Each
The tool is designed for smaller volume of hose mounting, because it is operated by hand. Using the tool makes the rolling easier, as it opens the spiral ready for application. / / HAKOP – smaller tool for spirals OD 20 – 50mm / HAKOI – larger tool for spirals OD 63 – 140mm / / Start by rotating the spiral 1–2 rounds onto the hose / hose bundle. If the spiral is long it is better to start from the middle. / / Lift the spiral on top of the pin, with the pin towards the mounting direction. Holding spring follow the hose by turning the tool by its handle
Show more
HAKOP
Safeplast
Each
The tool is designed for smaller volume of hose mounting, because it is operated by hand. Using the tool makes the rolling easier, as it opens the spiral ready for application. / / HAKOP – smaller tool for spirals OD 20 – 50mm / HAKOI – larger tool for spirals OD 63 – 140mm / / Start by rotating the spiral 1–2 rounds onto the hose / hose bundle. If the spiral is long it is better to start from the middle. / / Lift the spiral on top of the pin, with the pin towards the mounting direction. Holding spring follow the hose by turning the tool by its handle
Show more
Safeplast
Additional info
The tool is designed for smaller volume of hose mounting, because it is operated by hand. Using the tool makes the rolling easier, as it opens the spiral ready for application.
HAKOP – smaller tool for spirals OD 20 – 50mm
HAKOI – larger tool for spirals OD 63 – 140mm
Start by rotating the spiral 1–2 rounds onto the hose / hose bundle. If the spiral is long it is better to start from the middle.
Lift the spiral on top of the pin, with the pin towards the mounting direction. Holding spring follow the hose by turning the tool by its handle
Safeplast
Additional info
The tool is designed for smaller volume of hose mounting, because it is operated by hand. Using the tool makes the rolling easier, as it opens the spiral ready for application.
HAKOP – smaller tool for spirals OD 20 – 50mm
HAKOI – larger tool for spirals OD 63 – 140mm
Start by rotating the spiral 1–2 rounds onto the hose / hose bundle. If the spiral is long it is better to start from the middle.
Lift the spiral on top of the pin, with the pin towards the mounting direction. Holding spring follow the hose by turning the tool by its handle