Support
Log in
Print

Mini power packs, 24 VDC

Browse to product table
Pros
  • Multi-purpose
  • Universal assembly
  • Short delivery time
Product details
  • Yield and current draw are load dependent
  • Not applicable in pressureless circulation pump situations
  • Designed for short-term and or intermittent operation
  • Consider the maximum duty cycle and minimum pause time
  • Consists of a press and return connection with female thread 1/4" BSP
  • Optionally expandable with NG6 valve
  • Adjustable pressure relief valve
  • Check valve in P
  • Tested and set to maximum pressure
  • Voltage: 24V DC
  • The following values apply at an operating pressure of 180 bar and an ambient temperature of 20°C:
  • Q = 3.6 l/min
  • Maximum duty cycle of DC motors depends on load.
  • Cooling time approx. 20 min.
  • Current consumption = 80 ampères
  • Other versions can be supplied on request
  • Configure your own hydraulic aggregate with the Kramp calculation and drawing program
  • The software can be downloaded from our website, see downloads at the bottom of each web page
Includes
  • Aggregate
  • Generate maintenance and operating instructions
  • EC declaration of conformity
  • Circuit diagram
Product
Unit

Tank capacity

Nominal volume flow rate

Max continous working pressure

Thread diameter of delivery side connection

Total length

Total width

Total height

MPP01002
Kramp
Each
8 l
1.2 cm³/rev
210 BAR
1/4 Inch
661 mm
235 mm
222 mm
Kramp
Tank capacity (litre)
Nominal volume flow rate (centimetre cubed per Rev)
Max continous working pressure (bar)
8
1.2
210