Print
Rod ends series GAL..UK
Browse to product table
Product | Unit | Basic load ratings dyn. Cr | Basic load ratings Stat. Cor | Distance basis center shaft h | Edge degrees α | Height house C1 | Height inner ring B | Inner diameter | Inside diameter d | Length L7 l7 | Length l2 | Male thread d3 | Basic load ratings dyn. C | Basic load ratings Stat. Co | Suitable for original number | Outside diameter ball dk | Outside diameter bearing | Outside diameter innerring d1 | Outside diameter D | Suitable for original number | Surface treatment | Thread length l | Thread type | Type | Weight | Width d2 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Each | 22.4 kN | 56.5 kN | 69 mm | 10 ° | 11 mm | 14 mm | 17.00 mm | 17 mm | 23 mm | 92 mm | M16 mm | 22500 N | 56500 N | GAL17-UK | 25 mm | 30 mm | 20.7 mm | 46 mm | GAL17-UK | Zinc-plated | 36 mm | Left Hand | Male thread | 0.21 kg | 46 mm | |
| Each | 31.5 kN | 75.6 kN | 78 mm | 9 ° | 13 mm | 16 mm | 20.00 mm | 20 mm | 27 mm | 104.5 mm | M20x1.5 mm | 31300 N | 75600 N | GAL20-UK | 29 mm | 35 mm | 24.1 mm | 53 mm | GAL20-UK | Zinc-plated | 43 mm | Left Hand | Male thread | 0.307 kg | 53 mm | |
| ||||||
| ||||||