Print
Rod eye type GA…
Browse to product table
Product | Unit | Hole diameter CN | Hole length EN | Edge angle | Shaft diameter T | Thread diameter KK | Thread pitch | Thread length AX | Hole centre to bottom distance CE | Radius of housing eye ER | Head width (hole length) U | Spanner size SW |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Each | 6 mm | 9 mm | 6.5 ° | 10 mm | M6 | 1.00 mm | 12 mm | 30 mm | 10 mm | 7 mm | 11.0 mm | |
| Each | 8 mm | 12 mm | 6.5 ° | 12.5 mm | M8 | 1.25 mm | 16 mm | 36 mm | 12 mm | 9 mm | 14.0 mm | |
| Each | 10 mm | 14 mm | 6.5 ° | 15 mm | M10 | 1.25 mm | 20 mm | 43 mm | 14 mm | 10.5 mm | 17.0 mm | |
| Each | 12 mm | 16 mm | 6.5 ° | 17.5 mm | M12 | 1.25 mm | 22 mm | 50 mm | 16 mm | 12 mm | 19.0 mm | |
| Each | 16 mm | 21 mm | 7.5 ° | 22 mm | M16 | 1.50 mm | 28 mm | 64 mm | 21 mm | 15 mm | 22.0 mm | |
| Each | 20 mm | 25 mm | 7 ° | 27.5 mm | M20 | 1.50 mm | 33 mm | 77 mm | 25 mm | 18 mm | 30.0 mm | |
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||