Print
Worm gear reducers, output flange F
Browse to product table
| Details | Simple, accurately aligned mounting of the reductor on the frame | |
|---|---|---|
| Application range | Suitable for GMR/GR reductors | |
| Benefits | Quick and precise assembly |
Product | Unit | Diameter bolt circle KM | Diameter hole KO | Diameter mounting flange KP | Distance center shaft to side KA | Height KB KB | Tolerance inner diameter | Thickness flange KQ | Tolerance inner diameter |
|---|---|---|---|---|---|---|---|---|---|
| Each | 87 mm | 9 mm | 110 mm | 67 mm | 7 mm | 60h8 | 95 mm | 60h8 | |
| Each | 90 mm | 11 mm | 125 mm | 90 mm | 9 mm | 70h8 | 110 mm | 70h8 | |
| Each | 150 mm | 11 mm | 180 mm | 82 mm | 10 mm | 115h8 | 142 mm | 115h8 | |
| Each | 165 mm | 14 mm | 200 mm | 111 mm | 13 mm | 130h8 | 170 mm | 130h8 | |
| Each | 175 mm | 14 mm | 210 mm | 111 mm | 13 mm | 152h8 | 200 mm | 152h8 | |
| Each | 230 mm | 14 mm | 280 mm | 131 mm | 15 mm | 170h8 | 260 mm | 170h8 | |
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||