Natisni

Dalbo OE

Name: Dalbo OE
Rating: 4.6 (31 reviews)

Brskanje po tabeli izdelkov

Se zanimate za nakup naših izdelkov?

Želite izvedeti več o cenah ali naročiti neposredno? To je mogoče, če ste povezani s predstavnikom Kramp na vašem območju. Ali želite izdelke prodajati prek Krampa kot njegov predstavnik? Potem se registrirajte!

Oddajte zahtevo za izdelavo računa

Poiščite Krampovega predstavnika

Posebej prilagojeni nasveti naših strokovnjakov
Več kot 500.000 izdelkov
Dostava 24-48

Se zanimate za nakup naših izdelkov?

Oddajte zahtevo za izdelavo računa

Poiščite Krampovega predstavnika

Posebej prilagojeni nasveti naših strokovnjakov
Več kot 500.000 izdelkov
Dostava 24-48

Izdelek	Enota	Premer	Hub hole	Debelina	Frame size	Teeth width	Bore diameter max.	Bore diameter min.	Distance mid lock screw to end	Širina	With bolt	Hole Ø	Dolžina	Wire Thickness	Original
Dal-Bo 12200 Thrust bearing	Each
Dal-Bo 14350 Prong with screw	Each
Dal-Bo 14806 Holder for seed tine 12 mm	Each
Dal-Bo 18101 Cross-kill ring 480/62 mm	Each
Dal-Bo 18102 Cross-kill ring 530/160 mm	Each
Dal-Bo 18103 Bush 90/62 mm	Each
Dal-Bo 18126 Cross-kill ring 600/60 mm	Each	600 mm	160 mm
Dal-Bo 18127 Bush 104/62 mm	Each
Dal-Bo 21398 Flange bearing 30 mm	Each
Dal-Bo 21465 Spindle	Each
Dal-Bo 27482 Tine clamp plate	Each			32 mm	50 x 30 mm	12 mm
Dal-Bo 33231 Knife	Each
Dal-Bo 33237 Spacer	Each
Dal-Bo 72377 Spacer piece	Each
Dal-Bo 72378 Complete bearing	Each						75 mm	57.5 mm	99 mm
Dal-Bo 72384 Nut	Each
Dal-Bo 74274 Pull stave KAT3	Each
Dal-Bo 74275 Pull stave KAT2	Each
Dal-Bo 74282 Pull stave KAT2/3	Each
Dal-Bo 74524 Pull stave d=60 KAT2/3	Each
Dal-Bo 74530 Pull stave d=60 KAT3	Each
Dal-Bo 74531 Pull stave d=60 KAT2	Each
Dal-Bo 76250 Ročaj	Each									60 mm
Dal-Bo 76252 Console 10MM	Each			8 mm							0
Dal-Bo 76255 Share point with guide plate	Each			10 mm						120 mm
Dal-Bo 90007 Wooden bearing Ø53 95x95	Each
Dal-Bo 90008 Bush	Each											50 mm
Dal-Bo 90012 Lock collar 50 mm complete	Each
Dal-Bo 90730DT Spring 6.5x37.5x350	Each	37.5 mm											350 mm	6.5 mm
Dal-Bo 90731 Spring 8x52.5x420	Each	52.5 mm											420 mm	8 mm
Dal-Bo 91695 Spindle	Each
Dal-Bo 91701 Tine, short 45x10	Each			10 mm						45 mm			410 mm		ja
Dal-Bo 91716 Tine, short 3-hole	Each
Dal-Bo 91735 Angled point 200x10	Each			10 mm						200 mm					0
Dal-Bo 92397 Screw M12x40 12.9	Each
Dal-Bo 92520 Samovarovalna matica M12	Each
Dal-Bo 92737 Specijalni vijak M12x35 10,9	Each
Dal-Bo 12218 Chain	Each
Dal-Bo 12223 Hub	Each
Dal-Bo 12225 Seal kit 80/40	Each
Dal-Bo 12231 Nut	Each
Dal-Bo 12232 Hub pin	Each
Dal-Bo 12239 Ball and socket	Each
Dal-Bo 12316 Seal kit	Each
Dal-Bo 12334 Lock collar Ø60 complete	Each
Dal-Bo 12357 Hub cap for HDL 50-6	Each
Dal-Bo 12358 Bearing set	Each
Dal-Bo 12832 Protection	Each
Dal-Bo 12851 Axle for hub	Each
Dal-Bo 12855 Aksel	Each
Dal-Bo 12861 Sealing	Each
Dal-Bo 12865 Washer	Each
Dal-Bo 13290 Bracket	Each
Dal-Bo 13295 Pin	Each
Dal-Bo 13296 Pin	Each
Dal-Bo 14351 Tooth for leveling	Each
Dal-Bo 14808 Seed tine 12 mm complete	Each
Dal-Bo 18000 Smooth Ring 55CM Snowflake	Each
Dal-Bo 18025 Waved ring	Each
Dal-Bo 18108 Crosskill ring 480	Each

Premer (millimetre)	Hub hole (millimetre)
600	160

Debelina (millimetre)	Frame size (millimetre)	Teeth width (millimetre)
32	50 x 30	12

Bore diameter max. (millimetre)	Bore diameter min. (millimetre)	Distance mid lock screw to end
75	57.5	99 mm

Širina (millimetre)
60

Debelina (millimetre)	With bolt
8	0

Debelina (millimetre)	Širina (millimetre)
10	120

Hole Ø (millimetre)
50

Premer (millimetre)	Dolžina (millimetre)	Wire Thickness (millimetre)
37.5	350	6.5

Premer (millimetre)	Dolžina (millimetre)	Wire Thickness (millimetre)
52.5	420	8

Original	Debelina (millimetre)	Dolžina (millimetre)
ja	10	410

Original	Debelina (millimetre)	Širina (millimetre)
0	10	200