Details

The MEC II-series pumps have an automatic protection system. So, for example, if a vane breaks, the rotor and rotor housing can be protected by the rotor—including the flange mountings—being pushed downwards
Pumps with a "ballast system", identified by B at the end of the item number (e.g. MEC9000MB) have a longer operating time in vacuum operation
The operating time at -0.95 bar lasts from 8 minutes (standard) up to a maximum of 15 minutes. Continuous operation is permissible at -0.6 bar.
MEC II-series pumps are supplied with long-life (heat-resistant) vanes as standard
MEC II-series pumps feature a temperature meter to enable the temperature to be read during operation
A maintenance hatch can be used to determine the wear condition of the vanes, indicating when the vanes need to be replaced
Each pump is subjected to a final check in the factory, in which the vacuum, compression and lubrication are tested, among other factors
A test report relating to the serial number is drawn up for each pump

Application range

These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks

Properties

These pumps can generate both positive pressure and vacuum

Consists of

Including PTO shaft cover
Without pressure relief valve (item 0200013) and vacuum valve (item 0155513)
The pumps are delivered without lubrication oil (item BP5070)

Technical info

Composition of the item numbers: MEC = series, 9000 = type, D = direct drive 1000 rpm, L = anti-clockwise rotation, R = clockwise rotation, A = automatic lubrication, B = ballast system
On pumps without automatic lubrication (no "A" in the item number), the pump is equipped with a forced lubrication system that is adjusted using dripper nozzles
On pumps without automatic lubrication, the quantity of lubrication oil is set in the factory and cannot be changed without a tool
In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation
The direction of rotation is determined when the axle to be driven is aligned with the observer
If the pump has a direct drive (for example, by a tractor unit) it must be driven anti-clockwise
Oil to be used for lubricating the vanes: genuine oil from B. P. (item number BP5070)

Benefits

Minimum repair costs thanks to the unique automatic protection system
As pumps from B.P. are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed

Product

Unit

Nominal volume flow rate

Drive type

Direction of rotation

Ballast air injection system

Consists of

Lubrication system type

Vane type

Crash protection system

Max vacuum

Max. relative pressure

Power requirement for max. pressure

Power requirement for max. vacuum

Diameter of hose connection

D,P

Safety valve connection diameter

Depression valve connection diameter

Total length

Total width

Height

Mounting holes diameter

Mounting holes distance

B,L

Mounting holes to shaft end distance

Mounting holes to end distance

Shaft centre to left side end distance

Shaft centre to right side end distance

Shaft centre to bottom distance

Shaft diameter

Max. shaft rotation

Reservoir capacity

Weight

Battioni Pagani

MEC9000DL

Vacuum pump direct drive CCW B.P.

Each

9030 l/min

PTO 1000 rpm without gearbox

Counter-clockwise (CCW)

Including PTO shaft cover / Without pressure relief valve (item 0200013) and vacuum valve (item 0155513) / The pumps are delivered without lubrication oil (item BP5070)

Forced

Long life

Yes

0.95 BAR

1.5 BAR

25 kW

16 kW

80 mm

2 Inch

1-1/2 Inch

610 mm

390 mm

575 mm

22 mm

189 mm / 246 mm

280 mm

141 mm

195 mm

164 mm

1-3/8 Inch

1400 r/min

2.5 l

132 kg

Battioni Pagani

MEC11000DL

Vacuum pump direct drive CCW B.P.

Each

11137 l/min

PTO 1000 rpm without gearbox

Counter-clockwise (CCW)

Including PTO shaft cover / Without pressure relief valve (item 0200013) and vacuum valve (item 0155513) / The pumps are delivered without lubrication oil (item BP5070)

Forced

Long life

Yes

0.95 BAR

1.5 BAR

30 kW

20 kW

80 mm

2 Inch

1-1/2 Inch

680 mm

390 mm

575 mm

22 mm

247 mm / 246 mm

286 mm

147 mm

195 mm

164 mm

1-3/8 Inch

1400 r/min

3 l

147 kg

Battioni Pagani

MEC11000DLA

Vacuum pump direct drive CCW auto-lube B.P.

Each

11137 l/min

PTO 1000 rpm without gearbox

Counter-clockwise (CCW)

Including PTO shaft cover / Without pressure relief valve (item 0200013) and vacuum valve (item 0155513) / The pumps are delivered without lubrication oil (item BP5070)

Automatic

Long life

Yes

0.95 BAR

1.5 BAR

30 kW

20 kW

80 mm

2 Inch

1-1/2 Inch

680 mm

390 mm

575 mm

22 mm

247 mm / 246 mm

286 mm

147 mm

195 mm

164 mm

1-3/8 Inch

1400 r/min

3 l

147 kg

Battioni Pagani

MEC11000DLAB

Vacuum pump direct drive CCW auto-lube and Ballast B.P.

Each

11137 l/min

PTO 1000 rpm without gearbox

Counter-clockwise (CCW)

Yes

Including PTO shaft cover / Without pressure relief valve (item 0200013) and vacuum valve (item 0155513) / The pumps are delivered without lubrication oil (item BP5070)

Automatic

Long life

Yes

0.95 BAR

1.5 BAR

30 kW

20 kW

80 mm

2 Inch

1-1/2 Inch

680 mm

390 mm

575 mm

22 mm

247 mm / 246 mm

286 mm

147 mm

195 mm

164 mm

1-3/8 Inch

1400 r/min

3 l

147 kg

Battioni Pagani

MEC13500DL

Vacuum pump direct drive CCW B.P.

Each

13845 l/min

PTO 1000 rpm without gearbox

Counter-clockwise (CCW)

Including PTO shaft cover / Without pressure relief valve (item 0200013) and vacuum valve (item 0155513) / The pumps are delivered without lubrication oil (item BP5070)

Forced

Long life

Yes

0.95 BAR

1.5 BAR

36 kW

24 kW

100 mm

2 Inch

1-1/2 Inch

770 mm

390 mm

575 mm

22 mm

247 mm / 246 mm

331 mm

192 mm

195 mm

164 mm

1-3/8 Inch

1400 r/min

3.5 l

165 kg

Battioni Pagani

MEC13500DLA

Vacuum pump direct drive CCW auto-lube B.P.

Each

13845 l/min

PTO 1000 rpm without gearbox

Counter-clockwise (CCW)

Including PTO shaft cover / Without pressure relief valve (item 0200013) and vacuum valve (item 0155513) / The pumps are delivered without lubrication oil (item BP5070)

Automatic

Long life

Yes

0.95 BAR

1.5 BAR

36 kW

24 kW

100 mm

2 Inch

1-1/2 Inch

770 mm

390 mm

575 mm

22 mm

247 mm / 246 mm

331 mm

192 mm

195 mm

164 mm

1-3/8 Inch

1400 r/min

3.5 l

165 kg

Battioni Pagani

MEC13500DLAB

Vacuum pump direct drive CCW auto-lube and Ballast B.P.

Each

13845 l/min

PTO 1000 rpm without gearbox

Counter-clockwise (CCW)

Yes

Including PTO shaft cover / Without pressure relief valve (item 0200013) and vacuum valve (item 0155513) / The pumps are delivered without lubrication oil (item BP5070)

Automatic

Long life

Yes

0.95 BAR

1.5 BAR

36 kW

24 kW

100 mm

2 Inch

1-1/2 Inch

770 mm

390 mm

575 mm

22 mm

247 mm / 246 mm

331 mm

192 mm

195 mm

164 mm

1-3/8 Inch

1400 r/min

3.5 l

165 kg

Nominal volume flow rate (litre per minute)

Drive type

Direction of rotation

9030

PTO 1000 rpm without gearbox

Counter-clockwise (CCW)

Nominal volume flow rate (litre per minute)

Drive type

Direction of rotation

11137

PTO 1000 rpm without gearbox

Counter-clockwise (CCW)

Nominal volume flow rate (litre per minute)

Drive type

Direction of rotation

11137

PTO 1000 rpm without gearbox

Counter-clockwise (CCW)

Nominal volume flow rate (litre per minute)

Drive type

Direction of rotation

11137

PTO 1000 rpm without gearbox

Counter-clockwise (CCW)

Nominal volume flow rate (litre per minute)

Drive type

Direction of rotation

13845

PTO 1000 rpm without gearbox

Counter-clockwise (CCW)

Nominal volume flow rate (litre per minute)

Drive type

Direction of rotation

13845

PTO 1000 rpm without gearbox

Counter-clockwise (CCW)

Nominal volume flow rate (litre per minute)

Drive type

Direction of rotation

13845

PTO 1000 rpm without gearbox

Counter-clockwise (CCW)

HANDLEIDING_MECDownloads

Technical_Brochure_ MECDownloads

B.P. - MEC II / 1000 rpm driven

Media (2)

Product	Unit	Nominal volume flow rate	Drive type	Direction of rotation	Ballast air injection system	Consists of	Lubrication system type	Vane type	Crash protection system	Max vacuum	Max. relative pressure	Power requirement for max. pressure	Power requirement for max. vacuum	Diameter of hose connection D,P	Safety valve connection diameter	Depression valve connection diameter	Total length E	Total width O	Height G	Mounting holes diameter F	Mounting holes distance B,L	Mounting holes to shaft end distance A	Mounting holes to end distance C	Shaft centre to left side end distance M	Shaft centre to right side end distance N	Shaft centre to bottom distance I	Shaft diameter	Max. shaft rotation	Reservoir capacity	Weight
Battioni Pagani MEC9000DL Vacuum pump direct drive CCW B.P.	Each	9030 l/min	PTO 1000 rpm without gearbox	Counter-clockwise (CCW)	No	Including PTO shaft cover / Without pressure relief valve (item 0200013) and vacuum valve (item 0155513) / The pumps are delivered without lubrication oil (item BP5070)	Forced	Long life	Yes	0.95 BAR	1.5 BAR	25 kW	16 kW	80 mm	2 Inch	1-1/2 Inch	610 mm	390 mm	575 mm	22 mm	189 mm / 246 mm	280 mm	141 mm	195 mm	195 mm	164 mm	1-3/8 Inch	1400 r/min	2.5 l	132 kg
Battioni Pagani MEC11000DL Vacuum pump direct drive CCW B.P.	Each	11137 l/min	PTO 1000 rpm without gearbox	Counter-clockwise (CCW)	No	Including PTO shaft cover / Without pressure relief valve (item 0200013) and vacuum valve (item 0155513) / The pumps are delivered without lubrication oil (item BP5070)	Forced	Long life	Yes	0.95 BAR	1.5 BAR	30 kW	20 kW	80 mm	2 Inch	1-1/2 Inch	680 mm	390 mm	575 mm	22 mm	247 mm / 246 mm	286 mm	147 mm	195 mm	195 mm	164 mm	1-3/8 Inch	1400 r/min	3 l	147 kg
Battioni Pagani MEC11000DLA Vacuum pump direct drive CCW auto-lube B.P.	Each	11137 l/min	PTO 1000 rpm without gearbox	Counter-clockwise (CCW)	No	Including PTO shaft cover / Without pressure relief valve (item 0200013) and vacuum valve (item 0155513) / The pumps are delivered without lubrication oil (item BP5070)	Automatic	Long life	Yes	0.95 BAR	1.5 BAR	30 kW	20 kW	80 mm	2 Inch	1-1/2 Inch	680 mm	390 mm	575 mm	22 mm	247 mm / 246 mm	286 mm	147 mm	195 mm	195 mm	164 mm	1-3/8 Inch	1400 r/min	3 l	147 kg
Battioni Pagani MEC11000DLAB Vacuum pump direct drive CCW auto-lube and Ballast B.P.	Each	11137 l/min	PTO 1000 rpm without gearbox	Counter-clockwise (CCW)	Yes	Including PTO shaft cover / Without pressure relief valve (item 0200013) and vacuum valve (item 0155513) / The pumps are delivered without lubrication oil (item BP5070)	Automatic	Long life	Yes	0.95 BAR	1.5 BAR	30 kW	20 kW	80 mm	2 Inch	1-1/2 Inch	680 mm	390 mm	575 mm	22 mm	247 mm / 246 mm	286 mm	147 mm	195 mm	195 mm	164 mm	1-3/8 Inch	1400 r/min	3 l	147 kg
Battioni Pagani MEC13500DL Vacuum pump direct drive CCW B.P.	Each	13845 l/min	PTO 1000 rpm without gearbox	Counter-clockwise (CCW)	No	Including PTO shaft cover / Without pressure relief valve (item 0200013) and vacuum valve (item 0155513) / The pumps are delivered without lubrication oil (item BP5070)	Forced	Long life	Yes	0.95 BAR	1.5 BAR	36 kW	24 kW	100 mm	2 Inch	1-1/2 Inch	770 mm	390 mm	575 mm	22 mm	247 mm / 246 mm	331 mm	192 mm	195 mm	195 mm	164 mm	1-3/8 Inch	1400 r/min	3.5 l	165 kg
Battioni Pagani MEC13500DLA Vacuum pump direct drive CCW auto-lube B.P.	Each	13845 l/min	PTO 1000 rpm without gearbox	Counter-clockwise (CCW)	No	Including PTO shaft cover / Without pressure relief valve (item 0200013) and vacuum valve (item 0155513) / The pumps are delivered without lubrication oil (item BP5070)	Automatic	Long life	Yes	0.95 BAR	1.5 BAR	36 kW	24 kW	100 mm	2 Inch	1-1/2 Inch	770 mm	390 mm	575 mm	22 mm	247 mm / 246 mm	331 mm	192 mm	195 mm	195 mm	164 mm	1-3/8 Inch	1400 r/min	3.5 l	165 kg
Battioni Pagani MEC13500DLAB Vacuum pump direct drive CCW auto-lube and Ballast B.P.	Each	13845 l/min	PTO 1000 rpm without gearbox	Counter-clockwise (CCW)	Yes	Including PTO shaft cover / Without pressure relief valve (item 0200013) and vacuum valve (item 0155513) / The pumps are delivered without lubrication oil (item BP5070)	Automatic	Long life	Yes	0.95 BAR	1.5 BAR	36 kW	24 kW	100 mm	2 Inch	1-1/2 Inch	770 mm	390 mm	575 mm	22 mm	247 mm / 246 mm	331 mm	192 mm	195 mm	195 mm	164 mm	1-3/8 Inch	1400 r/min	3.5 l	165 kg

Details	The MEC II-series pumps have an automatic protection system. So, for example, if a vane breaks, the rotor and rotor housing can be protected by the rotor—including the flange mountings—being pushed downwards Pumps with a "ballast system", identified by B at the end of the item number (e.g. MEC9000MB) have a longer operating time in vacuum operation The operating time at -0.95 bar lasts from 8 minutes (standard) up to a maximum of 15 minutes. Continuous operation is permissible at -0.6 bar. MEC II-series pumps are supplied with long-life (heat-resistant) vanes as standard MEC II-series pumps feature a temperature meter to enable the temperature to be read during operation A maintenance hatch can be used to determine the wear condition of the vanes, indicating when the vanes need to be replaced Each pump is subjected to a final check in the factory, in which the vacuum, compression and lubrication are tested, among other factors A test report relating to the serial number is drawn up for each pump
Application range	These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks
Properties	These pumps can generate both positive pressure and vacuum
Consists of	Including PTO shaft cover Without pressure relief valve (item 0200013) and vacuum valve (item 0155513) The pumps are delivered without lubrication oil (item BP5070)
Technical info	Composition of the item numbers: MEC = series, 9000 = type, D = direct drive 1000 rpm, L = anti-clockwise rotation, R = clockwise rotation, A = automatic lubrication, B = ballast system On pumps without automatic lubrication (no "A" in the item number), the pump is equipped with a forced lubrication system that is adjusted using dripper nozzles On pumps without automatic lubrication, the quantity of lubrication oil is set in the factory and cannot be changed without a tool In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation The direction of rotation is determined when the axle to be driven is aligned with the observer If the pump has a direct drive (for example, by a tractor unit) it must be driven anti-clockwise Oil to be used for lubricating the vanes: genuine oil from B. P. (item number BP5070)
Benefits	Minimum repair costs thanks to the unique automatic protection system As pumps from B.P. are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed